palintest Green Drop Kit Instructions Manual page 47

4.3.5 Setting Salinity
1) Turn on the meter and select mg/L or ppm
measurement mode.
2) Repeat steps 1 to 2 from Section 4.3.3
Press HOLD/ENTER until you view 'b.SAL'.
3)
4) Press HOLD/ENTER.
Press ▲ or ▼ to set the salinity value (in
5)
ppt).
Press HOLD/ENTER to confirm, 'CO' will be
6)
displayed.
7) Press CAL to return to measurement mode.
Factory default is 0.0. Salinity values up to 50 ppt
can be entered.