palintest Green Drop Kit Instructions Manual page 43

4.3.3 Measurement Mode selection (mg/L or
ppm)
You can select to measure in mg/L or ppm:-
Enter SETUP menu by pressing ON and MODE
1
simultaneously, holding both keys for 2
seconds.
Then release the ON key before releasing the
2
MODE key. 'StUP' indicator will appear followed
by 'COF.1'.
Press HOLD/ENTER until you view 'b.DO'.
3
Press ▲ or ▼ to select the desired mode of
4
measurement.
Press HOLD/ENTER to confirm.
5
Press CAL to return to measurement mode.
6