palintest Green Drop Kit Instructions Manual page 46

Setting Pressure
1) Enter the SETUP menu as described in
4.3.3.
Press ▲ or ▼ until you view 'DPr.7'.
2)
3) Press HOLD/ENTER, display will show
either 'A.HG' for mm Hg or 'A.PA' for kilo Pascal.
Press ▲ or ▼ to select.
4)
Press 'HOLD/ENTER' to confirm.
5)
Press ▲ or ▼ to set the pressure value.
6)
Press 'HOLD/ENTER' to confirm, 'CO' will be
7)
displayed.
8) Press CAL to return to measurement mode.