palintest Green Drop Kit Instructions Manual page 23

blinks while in manual ranging function.
In Calibration mode:
During conductivity and TDS calibration, press to scroll
through calibration values.
In SETUP mode:
Press to scroll through the setup subgroup programs.
SETUP Takes you into the SETUP mode. This mode lets you
customize meter preference and defaults, view calibration,
electrode offset data, adjust for temperature coefficient and
normalization temperature.
Inserting the Batteries
Four AAA batteries are included with your meter.
Use a Philips screwdriver to remove the two screws
holding the battery cover at the back of the
instrument
Remove battery cover to expose batteries.
Insert batteries. Follow the diagram inside the
cover for correct polarity.
Replace the battery cover into its original position
using the two screws removed earlier.
This meter shuts off automatically 20 minutes
after the last key press.