palintest Green Drop Kit Instructions Manual page 32

4.2.4 Taking pH measurements
Automatic Temperature
Compensation
Automatic Temperature
Compensation only occurs when a
conductivity probe is plugged into the
meter.
If there is no temperature sensor plugged into the
meter, the default manual temperature setting is
automatically 25°C. You can manually set the
temperature to match your working conditions using
a separate thermometer.
Be sure to remove the electrode soaker
bottle on the electrode before
measurement.
To rake readings:-
1 Rinse the pH electrode with deionised water
before use to remove any impurities adhering to
the probe body. If the pH electrode has
dehydrated, soak it for 30 minutes in Palintest
electrode storage solution solution (PT 105/4).
2 Press ON to switch on meter.