Fall Hazards; Collision Hazards - Mec Speed Level 84RT Series Operator's Manual

84RT Series Speed Level™

Fall Hazards

ART_3067
DO NOT CLIMB ON RAILS
ART_3058
DO NOT EXIT PLATFORM WHEN
ELEVATED

Collision Hazards

ART_3072
ART_3062
ART_3066
Page 6
DO NOT sit, stand or climb on the platform guard rails. Maintain a firm footing on the
platform floor at all times.
DO NOT exit the platform when elevated
DO NOT climb down from the platform when elevated.
Keep the platform floor clear of debris.
DO NOT fasten a fall restraint lanyard to an adjacent structure.
Ensure that the entry is properly closed before operating the machine.
Operators must comply with employer, job site and governmental rules regarding the use of
personal protective equipment.
Be aware of blind spots while operating this machine.
Watch for overhead obstructions when elevating the platform.
Watch for crushing hazards when holding the platform rail.
Reduce travel speed when moving the machine on slopes, when near personnel and obstacles,
or when surface conditions are wet, slippery or otherwise limiting.
DO NOT operate in the path of any crane unless the controls of the crane have been locked out
and/or precautions have been taken to prevent any possible collision.
Stunt driving and horseplay are PROHIBITTED.
Safety
91857rev2– February 2013