Base Controls Operation And Test - Mec Speed Level 84RT Series Operator's Manual

84RT Series Speed Level™

Base Controls Operation and Test

IMPORTANT—Be sure the area above the machine is clear of obstructions to allow full elevation of platform.
ART_3236
ART_2506 R2
Do not elevate the platform if the machine is not on a firm level surface.
ART_3237
Page 12
Select BASE Operation
• Turn the selector switch to BASE.
Emergency Stop
• Press the EMERGENCY STOP switch at any time to stop all machine functions.
• Turn switch clockwise to reset.
Elevate Platform
• Press and hold the RAISE button on the base control panel to elevate the platform.
Test Operation
• Elevate to maximum height.
• Releasing the button will stop elevation.
• Pressing the EMERGENCY STOP switch will stop elevation.
Lower Platform
• Press the LOWER button. Release when the desired platform height is reached.
Test Operation
• Lower the platform.
• Releasing the button will stop descent.
• Pressing the EMERGENCY STOP switch will stop descent.
Operating Instructions
91857rev2– February 2013