Mec Speed Level 84RT Series Operator's Manual page 25

84RT Series Speed Level™
Pre-Start Inspection Checklist
The operator must conduct a thorough Pre-Start Inspection of the machine before each work shift – see "Machine Inspections" on
page 22.
General Inspection Checklist
Initial Description
_______ Check that the operator's, safety, and responsibilities manuals are in the storage container located on the platform.
_______ Perform a visual inspection of all machine components. Look for missing parts, torn or loose hoses, hydraulic fluid
leaks, torn or disconnected wires, damaged tires etc.
_______ Check all structural components of the machine for cracked welds, corrosion and collision damage.
_______ Check all hoses and the cables for worn or chafed areas.
_______ Check the platform rails and sliding mid-rail entry for damage or modification.
_______ Check that all warning and instructional labels are legible and secure.
_______ Check the tires for damage.
_______ Check the tire pressure (not required for foam filled tires).
_______ Check the lower limit switch for visual damage or loose or missing hardware.
_______ All structural components, pins and fasteners are present and properly tightened.
Fluid Level Checklist
_______ Check for fluid leaks.
_______ Hydraulic fluid level (check with platform fully lowered).
Secure for operation
_______ Secure all covers and panels. Perform Routine Maintenance as needed, then proceed to the Functions Test.
DATE________INSPECTED BY __________________________________________
91857rev2– February 2013
Machine Inspections
Page 23