Glossary - Neptune E-CODER) R450i Installation And Maintenance Manual

A
antenna (pit)
MIU antenna used for pit installations.
antenna (whip)
RF antenna that can be removed to upgrade to a through-the-lid antenna.
C
conical-shaped gasket
Cone-shaped rubber gasket on the antenna cable used to seal the cable at the top of the
connector housing.
connector housing
Black plastic 1/4-turn connector used to waterproof the antenna cable connection to the pit MIU.
connector nut
Black plastic nut used to depress the conical-shaped gasket and seal antenna cable at the top of
the connector housing.
F
flat rubber washer
Washer used to seal the antenna cable connector housing to the pit E-CODER
L
light sensor
Component located under the recess that is used to activate the LCD. See Liquid Crystal Display.
E-CODER ®
)R450
i ™ Installation and Maintenance Guide

Glossary

®
)R450i™.
23