Rssi Values And R450™ System Capabilities; Table 4 - Config Email Breakdown - Neptune E-CODER) R450i Installation And Maintenance Manual

Chapter 5: Activating and Testing the E-CODER
4. When the collector receives the configuration packet, the host sends an email or Short
Message Service (SMS) confirmation to allow verification of proper installation and
E-CODER)R450i location. The following is an example of the email text.
The subject line of the email provides a quick summary of the detailed information which is
included. The following table provides a breakdown of the email highlights.
1224
G
–89
US 29
RSSI Values and R450™ System Capabilities
Signal Strength (RSSI values) is a key indicator of the R450 system health as well as the
communication capabilities of the E-CODER)R450i to and from the R450 DC.
These values are associated with the Uplink, the ability of the R450 DC to hear reading
information from the E-CODER)R450i, and Downlink, the ability of the E-CODER)R450i to
hear instructions from the R450 DC.
12
®
)R450i™
Table 4 – Config Email Breakdown
Value
Last four digits of MIU ID.
Valid read. The three types of reads are:
l
l
l
R450 DC Received Signal Strength Indicator (RSSI).
Data Collector Name.
Description
G – Valid read.
B – Bad read.
N – No register.
E-CODER ®
)R450
i ™ Installation and Maintenance Guide