General Information - Nortel Meridian 1 Option 11C Planning And Installation Manual

Page 314 of 408 Pre-programmed data

General information

553-3021-210 Standard 7.00
When an Option 11C system is initially installed, customer data must be
entered into the overlay programs. Telephones, for example, must be
assigned features on their keys to allow them to function properly.
However, the Software Daughterboard can be pre-programmed with the
customer data. If you load pre-programmed data into the system during the
Installation process, some overlay entries will be automatically configured on
the telephones. For example, you can choose a telephone model that has
predetermined feature and key assignments and a preassigned class of
service. This can be a significant time-saver if you have to program numerous
types of telephone models.
Pre-programmed data is not mandatory for software installation. In fact, the
Software Daughterboard can be programmed with the minimum number of
files to allow the Option 11C to operate.
January 2002