Nt8D15 E&M Trunk Card - Nortel Meridian 1 Option 11C Planning And Installation Manual

Page 192 of 408 Installing the circuit cards
Table 22
NT8D14 Universal trunk — modes and option settings (Part 2 of 2)
DID operation
Loop length>2000
DID operation
Loop length <2000
NT8D15 E&M Trunk card
Table 23
NT8D15 E&M Trunk card option settings
Mode of operation
4W — Type 1
4W — Type 2
2W — Type 1
Paging trunk
553-3021-210 Standard 7.00
Ω
Ω
OFF indicates no strap present.
J1 and J2 locations apply to all eight trunks.
2 Insert the card in its assigned slot.
The NT8D14 Universal Trunk card may be installed in card slots 1
through 30.
This trunk card provides four trunks which can function as 2W E&M, 4W
E&M, and Paging.
Procedure 27
E&M Trunk card installation
1 Set the switches (see the following table) for the NT8D15 E&M
trunk circuit card according to the following table.
2 Insert the card in its assigned slot.
The NT8D15 E&M Trunk card can be installed in card slots 1
through 30.
January 2002
J1, J2
J1, J2
J2
ON
ON
ON
ON
ON
OFF
J9
connect pins 2 - 3
connect pins 2 - 3
connect pins 2 - 3
connect pins 2 - 3