Nortel Meridian 1 Option 11C Planning And Installation Manual page 11

Overview of the Option 11C Page 11 of 408
Administration telephone
If the default model layouts for telephones and trunk routes are used, an
administrative telephone is all that is required to make adjustments to such
things as the numbering plan and access codes. A TTY input terminal is not
required for programming the Option 11C unless a custom layout is used.
The telephone used for administrative functions can be an M2616 or M2008
digital telephone. This phone can also double as a user's working telephone.
Changing or removing pre-programmed data
If the pre-programmed data is not applicable to users at a particular site, the
data can be revised on-site with a TTY, or remotely over a modem
connection. If desired, the user can start with the minimal amount of data
required for initial software programming which is the configuration record.
This step must be performed while the user is in the Software Installation
Program.
Set-Based Administration
The Set-Based Administration feature simplifies system installation and
administration by enabling a telephone set to perform several administrative
and maintenance procedures. Examples such as changing data associated
with specific set-related features, or changing Calling Party Name Display on
a particular set, can be performed through the Set-Based Administration
feature.
For more information about Set-based Administration, refer to Set-Based
Administration (553-3001-303).
Multiple-terminal access
The Option 11C allows a total of five users access to log in, load, and execute
overlays simultaneously. For example, if you have expansion cabinets, users
can access the system through the Main or Expansion cabinets at the same
time.
Three Serial Data Interface (SDI) ports are provided on the Main cabinet's
Small System Controller (SSC) card, while each expansion cabinet can be
accessed through three SDI ports on the SSC card of each IP Expansion
cabinet. One SDI port is available on each Expansion cabinet Fiber Receiver
card.
Option 11C Planning and Installation Guide