Connecting Telephones Without A Pftu - Nortel Meridian 1 Option 11C Planning And Installation Manual

Figure 95
Meridian Digital Telephone cross-connections

Connecting telephones without a PFTU

Procedure 41
Connecting telephones without a PFTU
1 Locate the telephone terminations on the cross-connect terminal.
2 Connect one end of the cross-connect wire to the leads of the
telephone.
3 Locate the line card terminations on the cross-connect terminal.
Refer to Table 37 on page 258 and Table 38 on page 259.
4 Connect the other end of the cross-connect wire to the assigned
TN terminal block.
Default DN assignments are given in the following Tables:
• Table 42, "Main Cabinet Default DN assignments," on
page 263
• Table 43, "Expansion Cabinet 1 Default DN assignments," on
page 264
Connecting the telephones Page 251 of 408
Option 11C Planning and Installation Guide