Power Down The Device / Cool The Tipper Heater - Magtek ExpressCard 2000 Preventive Maintenance Procedure

3 - Preventive Maintenance Procedure
3.8

Power Down the Device / Cool the Tipper Heater

1) Navigate to Menu >
2) Press the
Set Heater OFF
3) Note the value under Current Tipper Temp. If the tipper temperature is 50 degrees Centigrade or
hotter, the tipper heater is not safe to touch.
4) Take note of the current time, and plan your work to allow enough time for the tipper heater to cool,
which can take up to 15 minutes. You may be able to use compressed air to cool it more quickly.
5) Power down the device.
ExpressCard 2000| Instant Issuance Card Personalization System | Preventive Maintenance Procedure
Settings > Tipper to open the
button to turn off the tipper heater.
Page 16 of 25 (D99875651-25)
Tipper page.