Introduction - Magtek ExpressCard 2000 Preventive Maintenance Procedure

Instant issuance card personalization system

Hide thumbs Also See for ExpressCard 2000:

Table of Contents

2 - Introduction

Introduction

This document contains the preventive maintenance procedure for the ExpressCard 2000 (EC2000),

extracted from D99875607 ExpressCard 2000 Hardware Service Manual. It assumes the reader is

familiar with basic operation of the ExpressCard 2000's user and maintenance functions, so many of the

cross-references to deeper "how-to" procedures from that manual have been removed for brevity. For

details about performing any procedure described in this document, see that manual and D99875600

ExpressCard 2000 User Installation and Operation Manual.

The information in this document is intended for use by trained professional service

personnel only. It is not intended for general use. To maintain the safety and integrity of

the device, it is important to follow the procedures laid out in this document as-written

and in the order provided.

For your personal safety, and to prevent damage to the device, disconnect power from the

ExpressCard 2000 before you connect or disconnect any cable, electronic board, or

assembly.

ExpressCard 2000| Instant Issuance Card Personalization System | Preventive Maintenance Procedure

Page 6 of 25 (D99875651-25)

Table of Contents

Do you have a question about the ExpressCard 2000 and is the answer not in the manual?