Magtek ExpressCard 2000 Preventive Maintenance Procedure page 2

INFORMATION IN THIS PUBLICATION IS SUBJECT TO CHANGE WITHOUT NOTICE AND
MAY CONTAIN TECHNICAL INACCURACIES OR GRAPHICAL DISCREPANCIES. CHANGES
OR IMPROVEMENTS MADE TO THIS PRODUCT WILL BE UPDATED IN THE NEXT
PUBLICATION RELEASE. NO PART OF THIS DOCUMENT MAY BE REPRODUCED OR
TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, FOR
ANY PURPOSE, WITHOUT THE EXPRESS WRITTEN PERMISSION OF MAGTEK, INC.
MagTek® is a registered trademark of MagTek, Inc.
MagnePrint® is a registered trademark of MagTek, Inc.
Magensa™ is a trademark of MagTek, Inc.
MagneSafe™ is a trademark of MagTek, Inc.
ExpressCard 2000 is a trademark of MagTek, Inc.
Microsoft® and Windows® are registered trademarks of Microsoft Corporation.
All other system names and product names are the property of their respective owners.
Table 0.1 - Revisions
Rev Number
1.01 01/14/2014
2.01 06/27/2014
22 02/06/2015
23 04/08/2016
24 03/09/2017
25 11/06/2017
ExpressCard 2000| Instant Issuance Card Personalization System | Preventive Maintenance Procedure
Copyright © 2006 - 2017 MagTek, Inc.
Printed in the United States of America
Date
Initial release derived from 99875607-2.01-DRAFT
General updates to tipper heater replacement
Fix Roll to Printer button name in roller cleaning
Add steps to lubricate and test embosser hammer pin and
knuckle during preventive maintenance (section 3.12)
Minor clarification and structural fixes
Update section 3.5 to specify updating firmware if MagTek
Support Services has supplied a .CAB file; Update section 4 to
specify direct handoff of consumables; Retrofit standardized
Caution, Warning, Notice tables throughout
Page 2 of 25 (D99875651-25)
Notes