Update The Printer Firmware - Magtek ExpressCard 2000 Preventive Maintenance Procedure

3 - Preventive Maintenance Procedure
3) Press the
Download
"Loading the firmware. Please wait...."
4) Wait about 5 minutes for the firmware to finish downloading. Do not power off the device.
5) After the firmware update is complete, the device will make sounds as the MLB resets. Wait until the
sounds stop and the touchscreen reports "Finished loading the firmware."

3.5.3 Update the Printer Firmware

To update the printer firmware, follow the steps from section 3.5.2, but select the Printer radio button
and select the .hex file appropriate to the revision of the image printer firmware you want to install, before
pressing the Download
ExpressCard 2000| Instant Issuance Card Personalization System | Preventive Maintenance Procedure
button to download the .hex file to the controller. The system will report
button.
Page 12 of 25 (D99875651-25)