EMC Connectrix B Series Hardware Reference Manual page 34

Installation, Setup, and Login
2
2-10
Connectrix B Series XPath OS AP-7420B Hardware Reference Manual
5. Open the terminal emulator application and configure as follows:
For most
Windows systems
For most
UNIX systems
6. When the terminal emulator application stops reporting
information, press
7. Log in to the AP-7420B as admin. The default password is
"password".
At the initial login, you are prompted to enter new admin and
user passwords.
8. Modify passwords, if desired. Passwords can be 8 to 40 characters
and should include a combination of numbers and
upper/lowercase letters
C -C.
TRL
Example:
XPath OS
APswitch login: admin
Password:
Please change your passwords now.
Use Control-C to exit or press 'Enter' key to proceed.
Password was not changed. Will prompt again at next login
until password is changed.
APswitch:admin>
Parameter
Bits per second
Data bits
Parity
Stop bits
Flow control
Enter the following string at the prompt:
tip /dev/ttyb -9600
E .
NTER
.
To skip modifying the password, press
Value
9600
8
None
1
None