Installing The Serial Touch Driver - Elo TouchSystems 1529L User Manual
15” lcd touchmonitor
optional magnetic stripe reader,
customer display, barcode scanner
Hide thumbs
Also See for 1529L:
- User manual (70 pages) ,
- Product dimensions (4 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Installing the Serial Touch Driver
Installing the Serial Touch Driver for Windows 7, Windows Vista, indows XP, Windows 2000,
ME, 95/98 and NT4.0.
NOTE: For Windows 2000 and NT4.0 you must have administrator access rights to install the driver.
Make sure the serial connector (RS232) is plugged into the monitor and an open com port on the PC.
1 Insert the Elo CD‐ROM in your computer's CD‐ROM drive.
2 If the AutoStart feature for your CD‐ROM drive is active, the system automatically detects the CD and starts the setup
program.
3 Follow the directions on the screen to complete the driver setup for your version of Windows.
4 If the AutoStart feature is not active:
5 Click Start > Run.
6 Click the Browse button to locate the EloCd.exe program on the CD‐ROM.
7 Click Open, then OK to run EloCd.exe.
8 Follow the directions on the screen to complete the driver setup for your version of Windows.
Advertisement
Table of Contents
