Factory Default Settings For The Wlan Port - Comtrol DeviceMaster AIR User Manual

Factory Default Settings for the WLAN Port

Hardware Specifications and Compliance Notices
Item
WLAN port modulation techniques
WLAN port transmitter output
power
WLAN port external antenna type
WLAN port over-driving levels
SNMP support
Dimensions (without antenna)
Weight (device, only; excluding
power supply)
This table illustrates the DeviceMaster AIR
WLAN port defaults. You can reset the
DeviceMaster AIR to the factory defaults by
selecting the Reset button.
WLAN Port
Operating Mode Infrastructure
SSID default
Channel 6
Transmission
Auto
rates
Encryption No
Administrator Blank (no password
password needed)
IP address mode Static
IP address 192.168.0.30
Subnet mask 255.255.255.0
Username admin (all lower case)
Factory Default Settings for the WLAN Port
PBCC (22Mbps/8.5db)
PBCC (11Mbps/4.5db)
CCK (11Mbps/8.5db)
PBCC (5.5Mbps/1.5db)
CCK (5.5Mbps/5.5db)
Barker (2Mbps/3db)
Barker (1Mbps/0db)
15dBm ± 2dB
Detachable 1.0dB gain with reverse SMA
connector
Tolerates up to +17dBm at the antenna
Monitoring only.
4.57" x 5.5" x 1.94"
15 oz
Default Setting
DeviceMaster AIR User Guide: 2000365 Rev. C - 59
Specification
Reset