Comtrol DeviceMaster AIR User Manual page 17

Hardware Installation and WLAN Configuration
6. Select Continue.
7. Close the web browser.
8. If necessary, reset your computer's IP address back to its original values.
9. Ping the new IP address and verify that it responds.
10. Remove the Ethernet cable from the network port and use the appropriate
procedure for your environment:
• 1-Port Serial Device Server Connection
• Ethernet-to-Wireless Bridge Connection
Configuring an IP Address (Static or DHCP)
on Page 18
on Page 19
DeviceMaster AIR User Guide: 2000365 Rev. C - 17