Using The Updater Utility (Socketserver And Bootloader); Installing The Rts Updater Utility; Upload Procedure - Comtrol DeviceMaster AIR User Manual

Using the Updater Utility (SocketServer and Bootloader)

Installing the RTS
Updater Utility

Upload Procedure

Updating Firmware
After you have installed the RTS Updater Utility, use the following procedures to
update the Bootloader or SocketServer firmware.
If you do not have the RTS Updater Utility installed, you can install from the
Comtrol CD shipped with your product or download the latest version from:
http://support.comtrol.com/download.asp?partnumber=1800165.
Note: Windows 2000, Windows XP, and Windows Server 2003 users can use
PortVision Plus. The RTS Updater Utility mainly supports Windows NT.
Use the following procedure to install or update the RTS Update utility.
1. Unzip the 1800165#.exe file if you downloaded or unzip the utility from the
Comtrol CD, which automatically starts the Installation wizard.
where # represents a file version, such as, A or B
2. Follow the Installation wizard.
Use the following procedure to update the Bootloader firmware on the
DeviceMaster AIR.
1. Verify that you have the .bin file and RTS Updater utility discussed in
Preparing to Update Firmware
2. From the Start button, select Programs>Comtrol Utility>DeviceMaster RTS
Update Utility>dmrtsupd.exe.
3. Enter IP address of DeviceMaster AIR that you want to update.
4. Go to the appropriate discussion to update the firmware:
• Bootloader on Page 43
• SocketServer on Page 42
Using the Updater Utility (SocketServer and Bootloader)
on Page 39.
DeviceMaster AIR User Guide: 2000365 Rev. C - 41