Bootloader; Updating The Wireless Firmware - Comtrol DeviceMaster AIR User Manual

Hide thumbs Also See for DeviceMaster AIR:

Table of Contents

Bootloader

Updating Firmware

Use this procedure to upload Bootloader.

1. Select the Reset button and quickly select the

Query button.

Note: If it displays the NS-Link or

SocketServer version, repeat Step 1.

2. Select Ok after you confirm that it is the

DeviceMaster AIR that you want to update.

Note: If it is not the correct DeviceMaster AIR,

enter the correct IP address and perform

Steps 1 and 2.

3. Browse to the location of the .bin file for

Bootloader.

4. Select the Download button to start the update procedure.

5. Select the Close button after the download has completed.

6. Verify the new Bootloader version:

a. Select the Reset button and quickly select the

Query button.

Note: If it displays the NS-Link or

SocketServer version, repeat Step a.

b. Exit the application after resetting the

device, even if you plan on updating the

SocketServer.

If you do not close the application you may

not be able to query for the SocketServer

version.

Use your web browser and the Administrator tab to upgrade the firmware that

supports the wireless port.

When you update the firmware, the wireless configuration settings are reset to the

DeviceMaster AIR User Guide: 2000365 Rev. C - 43

Bootloader

Table of Contents