Updating Firmware With Portvision Plus - Comtrol DeviceMaster AIR User Manual

Hide thumbs Also See for DeviceMaster AIR:

Table of Contents

Updating Firmware with PortVision Plus

40 - DeviceMaster AIR User Guide: 2000365 Rev. C

•

http://support.comtrol.com/download.asp?partnumber=1800110

Bootloader

•

http://support.comtrol.com/download.asp?partnumber=1800111

SocketServer

If necessary, unzip (unpackage) the file, if the file extension is .tgz. If the

downloaded file has a .bin extension, it is not necessary to unpackage the file.

Note: You can use the latest version of

environment. The .tgz file extracts to a .tar file and the .tar file extracts to the

.bin file.

You can use this procedure to upload firmware.

Note: PortVision Plus cannot upload the wireless firmware. See

Wireless Firmware

1. Make sure that you have downloaded and if necessary, unzipped the firmware.

See

Latest Firmware

2. Highlight the device that you want to update or shift-click and select multiple

devices.

3. Right click and select Upload Firmware (or the Upload button), browse to the

bootloader or SocketServer .bin file, and select Open.

4. Select Yes to the Upload Firmware message that warns you that this is a

sensitive process.

It may take a few moments for the firmware to upload onto the device. The

device will reboot itself during the upload process.

5. Select Ok.

6. In the next minute, PortVision Plus updates the List View pane and displays

the new firmware version.

Winzip

to unzip the firmware in a Microsoft

on Page 43.

(above), if you need to download the firmware.

Updating the

Updating Firmware

Table of Contents