Installation Tools and Materials
You will need the following to install the Freedom XC PRO:
Wire stripper
n
Mounting (#2) screws or bolts
n
#2 Phillips torque screwdriver
n
Torque wrench for DC terminals (½" or 13mm socket
n
wrench)
AC cable (that is, two-conductor-plus-ground cable), sized
n
appropriately for load and application
½" (or ¾") trade-size strain relief clamps (for the AC cable
n
clamp holes)
Wire nuts or crimp connectors if installing the 20-pin
n
Communications Harness (PN: 808-0820) (sold separately)
DC cable, sized appropriately for load and application
n
Lugs for DC cables to fit
n
appropriate tools (like a crimping tool)
AC and DC disconnects and over-current protective devices
n
975-0799-01-01
5
" DC stud terminals as well as
/
16
Installation Tools and Materials
15