Xantrex Freedom XC PRO Series Owner's Manual page 10

Product Safety Information
ELECTRICAL SHOCK AND FIRE HAZARD
Do not open. No serviceable parts inside. Provided with
l
integral protection against overloads. Bonding between
conduit connections is not automatic and must be provided
as part of the installation.
Read guide before installing or using.
l
Do not cover or obstruct ventilation openings.
l
Do not mount in zero-clearance compartment – overheating
l
may result.
Do not expose to rain or spray. This inverter/charger is
l
designed for marine applications only when additional drip
protection is installed in certain orientations. See "Approved
Mounting Orientations" on the Installation Guide for more
information.
Install GFCIs only as specified in this guide. Other types may
l
fail to operate.
Do not connect AC OUT to any other source of power.
l
Damage to unit may occur.
For AC IN and AC OUT, use wires suitable for at least 75°C.
l
Failure to follow these instructions can result in injury or
equipment damage.
x
CAUTION
NOTES:
Follow these instructions and those published by the battery
l
manufacturer and the manufacturer of any equipment you
intend to use in the vicinity of the battery. Review cautionary
markings on these products and on the engine.
Freedom XC PRO Inverter/Charger products are designed
l
for deep cycle lead-acid batteries. See warning below when
connecting to lithium ion batteries.
Do not use transformerless battery chargers in conjunction
l
with the inverter/charger due to overheating.
LITHIUM ION BATTERY TYPE HAZARD
Make sure to use a lithium ion battery pack that includes a certified
Battery Management System (BMS) with built-in safety protocols.
Follow the instructions published by the battery manufacturer.
Failure to follow these instructions can result in serious injury or
equipment damage.
CAUTION
Freedom XC PRO Owner's Guide