Xantrex Freedom XC PRO Series Owner's Manual page 61

Testing in Grid Mode
To test the Freedom XC PRO:
With the test load from the previous test still connected and
n
operating, connect the shore power source.
The Freedom XC PRO transfers the test load to shore
n
power. The green LED indicating grid mode turns on and the
LCD screen displays the AC MODE icon.
If the test load operates, your installation is successful.
n
NOTE: If the Power button on the Freedom XC PRO is turned
ON, the Freedom XC PRO will automatically supply the
appliances with inverter power if the shore power source fails or
becomes disconnected.
If the Power button on the Freedom XC PRO is turned ON and
shore power voltage is too low (less than 90 volts AC), the unit will
transfer to inverter power to continue running your appliances.
NOTE: Whether or not the Power button is turned ON, shore
power will pass through the Freedom XC PRO to the output when
shore power is within normal operating range. The unit also starts
charging the battery after the transfer to grid mode.
NOTE: In the event of low or no battery voltage, shore power will
pass through the Freedom XC PRO to the output even when
shore power is outside the normal operating range.
975-0799-01-01
Basic Installation Procedures
45