Table of Contents
Advertisement
Specify the Virtual COM port range and continue the operation by checking the COM port table.
Serial Tunnel Wizard
The Serial Tunnel Wizard gives you the option to transparently pair two devices over the
network.
Select the devices that should be paired and move the devices into IP1 and IP2.
After configuring the serial setting of the ports, the serial tunnel will be built by assigning one port
as the TCP Server mode and the other as the TCP Client mode.
Group IP Wizard
When you have more than one device to configure, it is handful to use Group IP wizard to
configure all IP addresses of the devices remotely.
Select Group IP Wizard after opening JetPort Commander, or use Broadcast and find more than
one devices on the network and click Group IP Wizard hint at the bottom.
JetPort Serial Device Server User's Manual
Windows Management Tool
3-19
Advertisement
Table of Contents
