Table of Contents
Advertisement
TCP Server proceeds as follows:
1. Network host requests a TCP connection with JetPort in TCP Server Mode by IP address and
port number.
2. Once the connection is established, data can be transmitted in both directions from the host to
the JetPort device, and vice versa.
To configure TCP Server, select TCP Server Mode in Service Mode of Port Configuration.
"Auto Scan" the TCP Data Port number that is available from current host.
The Control Port is Data Port number plus one.
Define the max. connection allowed from 1 to 5.
Apply and Save the changes.
function refreshes the current connections.
Miscellaneous Settings:
3-12
JetPort Serial Device Server User's Manual
Advertisement
Table of Contents
