4 Feature Configuration
JetI/O 6500 series Industrial Managed Ethernet I/O module provides several
configuration methods. This chapter introduces the configuration steps.
Following topics are covered in this chapter:
4.1 Block I/O Configuration Utility
4.2 Block I/O OPC Server Utility
4.3 Device Finder Utility
4.4 SNMP
4.5 Web UI
4.6 Modbus/TCP Command set
4.6.1 Introduction of Modbus/TCP protocol
4.6.2 JetI/O 6510 Modbus/TCP command set
4.1
Block I/O Configuration Utility
Block I/O Utility is the major JetI/O Configuration Utility. With this tool, you can browse
the available units, view the status of each channel, configure the I/O settings, configure
active alarms and conditions&Go logic rule.
4.1.1
Installation
1. Go to the "Utility -> IO Configuration" folder. Click "Setup.exe" to run the setup
progress.
2. Click "Next" and type the Name and Company in the "User Information" window. Then
click "Next".
3. Choose the Destination Directory in the "Choose Installation Location" window. Then
click "Next".
11