3.
Broadcast the JetPort unit: JetPort Commander will broadcast the network and
search all available JetPort units in the network. The default IP address of JetPort is
"192.168.10.2".
4.
Configuring the JetPort unit:
4.1 Click on the JetPort unit and select "Add" for further configuring the unit.
4.2 Select "Static IP" if you want to specify the network parameters, or select "DHCP",
or "BootP" if you want dynamic configuration for the JetPort unit.
2-4
JetPort Serial Device Server User's Manual
Product Tip: If you have multiple Network
Adapters (i.e. wireless and wired), please
activate ONLY ONE Network Adapter that can
locate the JetPort devices, and CLOSE the rest
Network Adapters. Otherwise, JetPort
Commander may broadcast INCORRECTLY.