Korenix JetPort 5201 User Manual page 26

Select the available port number to map to.
When the configuration is finished and saved, the COM port number will be shown after port, and
you can monitor the port in Monitor menu.
Multiple Virtual COM Connections
Max. one connection is default. To create multiple Virtual COM connection, select max.
connection number that the JetPort device is allowed. After increasing the max. connection
number, other hosts on the same subnet as JetPort can use the port as Virtual COM port at the
same time.
Note that all the hosts for the multiple Virtual COM connections must have the same serial
parameters, i.e. baud rate, start bit, data bit, etc.
3-10
JetPort Serial Device Server User's Manual