Table of Contents
Advertisement
To configure UDP, select UDP Mode in Service Mode of Port Configuration.
"Auto Scan" the Listening port number of JetPort.
If there are more than one destination hosts, specify the IP address range by Destination Host IP
Begin and End. "Auto Scan" the sending port number of the device.
For example:
Destination Host Begin = 192.168.10.1
Destination Host End = 192.168.10.100
Send Port = 4040
Listening Port = 4032
*JetPort will receive Ethernet data from port 4032 and send to serial port
*JetPort will receive Serial data to 192.168.10.1 to 192.168.10.100 via port 4040
Apply and Save the changes.
JetPort Serial Device Server User's Manual
Windows Management Tool
3-15
Advertisement
Table of Contents
