Table of Contents
Advertisement
You can assign password to protect others from changing the configurations on the device.
If you assign password, you will need to give password every time when you access Windows,
Web, or Telnet consoles. The password will also validate on Setup Wizard configuration.
You can input max. 12 characters as password.
After modifying configuration, be sure to validate the changes by using "Apply Only" or "Apply
and Save".
Networking
JetPort supports both Static IP or DHCP/BootP IP configuration. After modifying configuration,
be sure to validate the changes by using "Apply Only" or "Apply and Save".
Notification
JetPort supports event notification by SNMP trap, email, or system log.
SNMP notification
To activate SNMP notification, check "SNMP management enable" from "Management" menu
and assign the "community", "location", "contact info", and Trap Server.
3-4
JetPort Serial Device Server User's Manual
Advertisement
Table of Contents
