ProFire PF2200-SB Installation Manual page 9

PRODUCT PROTECTION
To protect the system from being damaged, it should not be mounted:
1. Where chemicals may splatter or bubble over from a tank onto the system. Chemicals on the keypad
may interfere with an operator's ability to control the product or view the display and LED indicators.
2. Directly to a heated tank where excessive heat may damage the product. Refer to the maximum
operating temperature listed in this document.
3. Where anything may tip over due to wind or snow, some examples include poles that are not
appropriately secured into the ground or tripods not secured with anchor bolts or guy wires.
4. In locations that have a tendency of flooding.
IMPORTANT NOTE: It is recommended to avoid drilling into the top of the enclosure. If possible, side access
is better.
CONDUIT/CABLE/ENVIRONMENTAL CONSIDERATIONS
It is essential to ensure the cable and conduits to meet local code requirements to ensure the best
compliance, performance as well as a safe environment.
The PF2200 Single Burner BMS is designed, validated and verified under the following environmental
conditions.
System Voltage Range:
12V mode: 10.2 – 16.2 V
•
24V mode: 20.4 – 32.4 V
•
Ambient Temperature Range
Operating: -40 to 55°C / -40°F to 131°F
•
Storage: -40 to 55°C / -40°F to 131°F
•
DOC-001041 / v1.0
9