ProFire PF2200-SB Installation Manual page 24

INTERFACING
The PF2200 Single Burner BMS is a logic solver designed to interface with various sensors and final elements.
These configurations can be broken down into the following categories:
Inputs
Switch Contact Inputs: digital switch connection to the PF2200.
•
4-20mA Loop-Powered Inputs: 4-20mA input powered by the PF2200.
•
4-20mA Self Powered Inputs: 4-20mA input powered from an independent supply.
•
Outputs
Powered Outputs: switched output intended to power a solenoid.
•
Contact Output: switched output intended to provide status feedback.
•
Mixed I/O
Ionization / Ignition: switched output to control primary winding of an ignition transformer (Coil +/-)
•
combined with ionization flame detection on the secondary of the ignition transformer.
Commissioning Mode is a mode that elevates the user to access all settings within the system. This is usually
entered to make specific settings during installation or making major changes to the system. Below is an
example of the different views from User Mode and Commissioner Mode.
User
From the Status screen you can navigate to the Settings screen by using the Carousel key.
DOC-001041 / v1.0
Commissioner
24