ProFire PF2200-SB Installation Manual page 21

The optional Manual Switch (part# PFA-004260) mentioned above can be ordered by contacting
Energy.
NAVIGATION
The PF2200 series incorporates an intuitive design for system navigation. The front panel of the enclosure has a
large backlit screen, a status LED indicator and a minimalist keypad for interaction and commissioning of the
system.
START KEY – When pressed, the user interface prompts the user to confirm the start request.
A second user action is required to confirm the start request. This second action can be done
by pressing the START key or pressing the OK key. If no Waits or Alarms are present, the
system initiates the startup sequence.
STOP KEY – When pressed, the user is prompted to confirm the stop request. A second user
action is required to confirm the stop request. This second action can be done by pressing the
STOP key again, the OK key. A shutdown of the burner is then initiated.
BACK KEY – When pressed, the BACK key can escape the current dialog, return to the
previous screen, or escape the settings screen menus.
ARROW KEYS – Use the ARROW keys to navigate the user interface, such as highlighting
menus, and menus items.
CAROUSEL KEY – Use the CAROUSEL key to alternate between the Status screen, Settings
screen, and the System screen.
OK KEY – The OK key allows the user to accept changes to settings, and acknowledge on-
screen prompts.
HELP KEY – When pressed the HELP key displays and mapping, and description of the PF2200
keys.
COMMISSION KEY – When pressed, the COMMISSION key displays a prompt for the user to
confirm the entrance into the commissioning level of the system.
MENU MAP
Below is a mapping of the PF2200-SB in Commissioner mode.
DOC-001041 / v1.0
Profire
21