ProFire PF2200-SB Installation Manual page 8

MOUNTING CONSIDERATIONS
The PF2200 has the approvals for installation in a Zone 2 or Class 1 Division 2 locations. The enclosure is
typically mounted near the burner it is controlling or in another location that is both safe and easily
accessible. The recommended mounting height is 1.5m (5ft) above the ground or a platform for the comfort
of the operators. Ensure that the BMS is mounted in a safe area for operation. Look for tripping, high heat
exposure, and other potential hazards.
ACCESSIBILITY
PF2200 enclosures shall be mounted upright in such a way that the screen is clearly visible, and the keypad is
easy to access. Adequate space should be provided so that the enclosure door can fully open during
maintenance and commissioning.
SECURITY
In some situations, it may be desirable to mount the system in a location not accessible to the general public
to prevent accidental or intentional tampering.
OPERATOR SAFETY
Avoid placing the system in locations that are dangerous to the operator. Examine the area surrounding the
potential installation site and look for such things as nearby open flames or close proximity to tanks that
might overflow, and other potentially harmful situations.
PERFORMANCE
Enclosures should be mounted to minimize the run-lengths to the burner assembly (ignition coil/rod and
flame detect rod), as well as the valve train (solenoids) and temperature inputs elements.
DOC-001041 / v1.0
8