ProFire PF2200-SB Installation Manual page 16

COIL
The PF2200 system must be connected to a PROFIRE ignition coil.
SINGLE ROD CONFIGURATION
FLAME DETECTION WIRE LENGTH LIMITATIONS
Distance Between 2200 and Pilot *
0 - 10 feet
10 - 25 feet
25 - 60 feet
*For single rod installations, the distance is defined as the length from the positive ion terminal, to the
ignition coil, plus the distance from the ignition coil, to the ignition/flame rod as shown in the Single Rod
Wiring Diagram. Note that the ignition wire should be no longer than 3m (10 ft).
DOC-001041 / v1.0
Wire Size
14 - 16 gauge
7mm Ignition Wire
7mm Ignition Wire
16