PREVENTATIVE MAINTENANCE
In order to ensure that the PF2200 system works correctly and efficiently, the following maintenance and
inspection diagnostic queries should be followed:
Ensure that all wires are connected correctly.
•
Routinely check for corrosion.
•
Wires must not be frayed or worn, and all insulation must be intact and undamaged.
•
Ensure that no moisture or condensation is apparent on the board within the enclosure.
•
Check that the board does not show any sign of mechanical damage (e.g. – damage from
•
impact from a dropped item such as a screwdriver).
Check that the board does not show any sign of electrical damage. This means that no
•
components should be burnt or damaged in any way.
Confirm that the temperature of the board is within ambient temperature operating limits.
•
Check that the device is not subject to excessive vibration.
•
Routine inspections should be performed on all equipment. If any abnormality is found,
•
corrective actions should be taken. If the abnormality cannot be corrected, contact PROFIRE
as soon as possible.
A qualified technician should perform any tests necessary to confirm that the equipment is
•
still in a safe condition.
care should be taken to ensure that testing does NOT damage the equipment in any way.
Note:
CLEANING
If the card becomes dirty it can be cleaned with compressed air. Do NOT use solvents, cleaners, or liquids to
clean the board. Caution must be exercised when cleaning the board in order to prevent damage from ESD
(electrostatic discharge).
REPLACEMENT PARTS
Please contact PROFIRE should any replacement be required.
DOC-001041 / v1.0
39