Removing A Child Restraint System Installed With A Seat Belt - Toyota INNOVA Owner's Manual

If your child restraint system
5
is not equipped with a lock-
off (a seat belt locking fea-
ture),
restraint system using a lock-
ing clip.
After installing the child restraint system, rock it back and forth to
6
ensure that it is installed securely. (P. 98)

Removing a child restraint system installed with a seat belt

■
Press the buckle release button and fully retract the seat belt.
When releasing the buckle, the child restraint system may spring up due
to the rebound of the seat cushion. Release the buckle while holding
down the child restraint system.
Since the seat belt automatically reels itself, slowly return it to the stow-
ing position.
When installing a child restraint system
■
You may need a locking clip to install the child restraint system. Follow the
instructions provided by the manufacturer of the system. If your child restraint
system does not provide a locking clip, you can purchase the following item
from your Toyota dealer: Locking clip for child restraint system
(Part No. 73119-22010)
INNOVA_OM_OM71301E_(GE)
secure the child
1-2. Child safety
97
1