When registering/connecting a cellular phone
A cellular phone cannot be registered.
An incorrect passcode was entered on the cellular phone.
Enter the correct passcode on the cellular phone.
The registration operation has not been completed on the cellular phone
side.
Complete the registration operation on the cellular phone (approve
registration on the phone).
Old registration information remains on either this system or the cellular
phone.
Delete the existing registration information from both this system
and the cellular phone, then register the cellular phone you wish to
connect to this system. (P. 450, 451)
A Bluetooth
Another Bluetooth
Manually connect the cellular phone you wish to use to this
system. (P. 454)
Bluetooth
Enable the Bluetooth
Automatic Bluetooth
Vehicles without smart entry & start system
Set automatic Bluetooth
the engine switch is turned to the "ACC" or "ON" position.
(P. 453)
Vehicles with smart entry & start system
Set automatic Bluetooth
the engine switch is turned to ACCESSORY or IGNITION ON mode.
(P. 453)
"Unable to dial. Please check your phone." "Please check your Bluetooth
device settings." message is displayed.
Bluetooth
Enable the Bluetooth
Old registration information remains on either this system or the cellular
phone.
Delete the existing registration information from both this system
and the cellular phone, then register the cellular phone you wish to
connect to this system. (P. 450, 451)
*
: The Bluetooth
Bluetooth SIG, Inc.
INNOVA_OM_OM71301E_(GE)
®
connection cannot be made.
®
device is already connected.
®
function is not enabled on the cellular phone.
®
function on the cellular phone.
®
connection on this system is set to off.
®
connection on this system to on when
®
connection on this system to on when
®
function is not enabled on the cellular phone.
®
function on the cellular phone.
®
word mark and logos are registered trademarks owned by
®
497
5-24. Bluetooth
*
5