Page 1 TABLE OF CONTENTS Adjusting and operating features such as door locks, Before driving mirrors, and steering column. When driving Driving, stopping and safe-driving information. Air conditioning and audio systems, as well as other Interior features interior features for a comfortable driving experience. Maintenance and Cleaning and protecting your vehicle, performing do-it- care...
Page 2: Table Of Contents
TABLE OF CONTENTS Index 1-7. Safety information Before driving Correct driving posture..122 SRS airbags ....... 124 Child restraint systems..137 1-1. Key information Installing child restraints..148 Keys........36 Airbag manual on-off system......159 1-2. Opening, closing and locking the doors Smart entry &...
Page 3: Table Of Contents
2-3. Operating the lights and 3-2. Using the audio system wipers Audio system type....257 Headlight switch....211 Using the radio ....260 Fog light switch ....216 Using the CD player ... 265 Windshield wipers and Playing back MP3 and washer ......
Page 4: Table Of Contents
TABLE OF CONTENTS Index Maintenance and care When trouble arises 4-1. Maintenance and care 5-1. Essential information Cleaning and protecting Emergency flashers ... 386 the vehicle exterior ... 306 If your vehicle needs to Cleaning and protecting be towed ......388 the vehicle interior ....
Page 5: Table Of Contents
Vehicle specifications 6-1. Specifications Maintenance data (fuel, oil level, etc.).... 444 Fuel information ....457 6-2. Customization Customizable features ..459 Index Abbreviation list ......462 Alphabetical index..... 463 What to do if......471 iQ_WE_74014E...
Page 6 Pictorial index Exterior Turn signal lights P. 193 Front position lights P. 211 Outside rear view mirrors P. 95, 254 Windshield wipers P. 218 Hood P. 319 Turn signal lights P. 193  Front fog lights P. 216 Headlights P. 211 iQ_WE_74014E...
Page 7: Table Of Contents
Rear turn signal lights P. 193 Stop/tail lights P. 211  Rear window defogger Fuel filler door P. 103 P. 252, 254 Side doors Rear window wiper P. 39, 72 P. 222 Rear fog light Tires (right-hand drive Rotation P. 347 vehicles) P.
Page 8: Table Of Contents
Interior Pictorial index (Left-hand drive vehicles) Horn P. 196 Bottle holders P. 289 SRS driver airbag P. 124 SRS front passenger airbag P. 124  Rear seat P. 82 Floor mats P. 299  Auxiliary box SRS seat cushion P. 290 airbag P.
Page 9 Interior light P. 287 Assist grips P. 298 SRS curtain shield  airbags P. 124 SRS rear window curtain  shield airbag P. 124 Seat belts P. 86 Sun visors P. 293 Anti-glare inside rear view mirror P. 92 Vanity mirrors P.
Page 10 Interior Pictorial index (Left-hand drive vehicles) Inside door lock button P. 73 Window lock switch P. 100 Power window switches P. 100 Door lock switch P. 73 Bottle holders P. 289 iQ_WE_74014E...
Page 11 VSC OFF switch P. 225 Shift lever P. 185, 189  Shift lock override button P. 425 Parking brake lever P. 194 Cup holder P. 289  AUX port P. 282  Seat heater switch P. 296  : If equipped iQ_WE_74014E...
Page 12 Instrument panel Pictorial index (Left-hand drive vehicles) Multi-information display P. 205 Gauges and meters P. 197 SRS knee airbag P. 124 Airbag manual on-off switch P. 159 Hood lock release lever P. 319 Fuel filler door opener P. 103 iQ_WE_74014E...
Page 13 Vehicles with audio system Audio system P. 257 PASSENGER AIRBAG indicator P. 159, 399 Vehicles without audio system PASSENGER AIRBAG indicator P. 159, 399 iQ_WE_74014E...
Page 14 Instrument panel Pictorial index (Left-hand drive vehicles) Vehicles with a manual air conditioning system Air conditioning system P. 238 Emergency flashers switch P. 386 Power outlet P. 295 Rear window defogger switch/ rear window defogger and outside rear view  mirror defoggers switch P.
Page 15 Vehicles with an automatic air conditioning system Rear window defogger switch/ rear window defogger and outside rear view  Air conditioning system P. 244 mirror defoggers switch P. 252, 254 Emergency flashers switch P. 386 Power outlet P. 295  : If equipped iQ_WE_74014E...
Page 16 Instrument panel Pictorial index (Left-hand drive vehicles) Windshield wipers and washer switch P. 218 Rear window wiper and washer switch P. 222 Engine (ignition) switch (vehicles with smart entry & start system) P. 179 Engine (ignition) switch (vehicles without smart entry & start system) P.
Page 17 Headlight switch P. 211 Clock reset button P. 209 Turn signal lever P. 193  Front fog light switch MODE button P. 206 Rear fog light switch P. 216 Headlight leveling dial P. 212 Outside rear view mirror switches P. 95 Tilt steering lock release lever P.
Page 18 Instrument panel Pictorial index (Left-hand drive vehicles) Audio switches P. 257, 284 iQ_WE_74014E...
Page 19 Interior Pictorial index (Right-hand drive vehicles) Horn P. 196 Bottle holders P. 289 SRS driver airbag P. 124 SRS front passenger airbag P. 124  Floor mats P. 299 Rear seat P. 82 SRS seat cushion  airbag Auxiliary box P.
Page 20 Interior Pictorial index (Right-hand drive vehicles) Interior light P. 287 Assist grips P. 298 SRS curtain shield  airbags P. 124 SRS rear window curtain  shield airbag P. 124 Seat belts P. 86 Sun visors P. 293 Anti-glare inside rear view mirror P.
Page 21 Inside door lock button P. 73 Window lock switch P. 100 Power window switches P. 100 Door lock switch P. 73 Bottle holders P. 289  : If equipped : NEVER use a rearward facing child restraint on a seat protected by an ACTIVE AIRBAG in front of it, DEATH or SERIOUS INJURY to the CHILD can occur.
Page 22 Interior Pictorial index (Right-hand drive vehicles) VSC OFF switch P. 225  Shift lock override button P. 425 Shift lever P. 185, 189 Parking brake lever P. 194 Cup holder P. 289  AUX port P. 282  Seat heater switch P.
Page 23 Instrument panel Pictorial index (Right-hand drive vehicles) Gauges and meters P. 197 Multi-information display P. 205 SRS knee airbag P. 124 Airbag manual on-off switch P. 159 Hood lock release lever P. 319 Fuel filler door opener P. 103  : If equipped iQ_WE_74014E...
Page 24 Instrument panel Pictorial index (Right-hand drive vehicles) Vehicles with audio system Audio system P. 257 PASSENGER AIRBAG indicator P. 159, 399 Vehicles without audio system PASSENGER AIRBAG indicator P. 159, 399 iQ_WE_74014E...
Page 25 Vehicles with a manual air conditioning system Air conditioning system P. 238 Emergency flashers switch P. 386 Power outlet P. 295 Rear window defogger switch/ rear window defogger and outside rear view  mirror defoggers switch P. 252, 254  : If equipped iQ_WE_74014E...
Page 26 Instrument panel Pictorial index (Right-hand drive vehicles) Vehicles with an automatic air conditioning system Rear window defogger switch/ rear window defogger and outside rear view  mirror defoggers switch P. 252, 254 Air conditioning system P. 244 Emergency flashers switch P.
Page 27 Headlight switch P. 211 Clock reset button Turn signal lever P. 209 P. 193  MODE button P. 206 Front fog light switch Rear fog light switch P. 216 Tilt steering lock release lever P. 91  : If equipped iQ_WE_74014E...
Page 28 Instrument panel Pictorial index (Right-hand drive vehicles) Windshield wipers and washer switch P. 218 Rear window wiper and washer switch P. 222 Outside rear view mirror switches P. 95 Headlight leveling dial P. 212 Engine (ignition) switch (vehicles with smart entry & start system) P.
Page 29 Audio switches P. 257, 284 iQ_WE_74014E...
Page 30: For Your Information
Accessories, spare parts and modification of your Toyota Both genuine Toyota and a wide variety of other spare parts and accessories for Toyota vehicles are currently available on the market. Should it be...
Page 31 Further information regarding frequency bands, power levels, antenna posi- tions and installation provisions for the installation of RF-transmitters, is available on request at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Scrapping of your Toyota The SRS airbag and seat belt pretensioner devices in your Toyota contain explosive chemicals.
Page 32 CAUTION  General precautions while driving Driving under the influence: Never drive your vehicle when under the influ- ence of alcohol or drugs that have impaired your ability to operate your vehi- cle. Alcohol and certain drugs delay reaction time, impair judgment and reduce coordination, which could lead to an accident that could result in death or serious injury.
Page 33 This is a warning against something which, if ignored, may cause damage to the vehicle or its equipment. You are informed about what you must or must not do in order to avoid or reduce the risk of damage to your Toyota and its equipment.
Page 34 iQ_WE_74014E...
Page 35 Before driving 1-1. Key information 1-5. Refueling Keys........36 Opening the fuel tank cap........103 1-2. Opening, closing and locking 1-6. Theft deterrent system the doors Engine immobilizer Smart entry & start system ......108 system ......39 Double locking Wireless remote control ..
Page 36: Keys
1-1. Key information Keys The following keys are provided with the vehicle. Vehicles without smart entry & start system Keys Operating the wireless remote control function (P. 62) Key number plate Vehicles with smart entry & start system Electronic keys •...
Page 37 Keep the plate in a safe place such as your wallet, not in the vehicle. In the event that a key is lost, a new key can be made by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional, using the key number plate.
Page 38 1-1. Key information NOTICE  When bringing the vehicle to any authorized Toyota dealer or repairer or another duly qualified professional due to problems with the smart entry & start system Bring in all electronic keys of the vehicle. ...
Page 39: Smart Entry & Start System
1-2. Opening, closing and locking the doors  Smart entry & start system The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. (The driver should always carry the electronic key.) Electronic key Electronic Electronic...
Page 40 1-2. Opening, closing and locking the doors Unlocking and locking the doors Grip the handle to unlock the doors. Make sure to touch the sensor on the back of the handle. The door cannot be unlocked for 3 seconds after the door is locked.
Page 41 1-2. Opening, closing and locking the doors Press the lock button to lock the back door. Antenna location and effective range  Antenna location Antennas outside the cabin Antennas inside the cabin iQ_WE_74014E...
Page 42 1-2. Opening, closing and locking the doors  Effective range (areas within which the electronic key is detected) When locking or unlock- ing the doors The system can be oper- ated when the electronic key is within about 0.7 m (2.3 ft.) of an outside door handle.
Page 43 1-2. Opening, closing and locking the doors Battery-saving function  The battery-saving function will be activated in order to prevent the elec- tronic key battery and the vehicle battery from being discharged while the vehicle is not in operation for a long time. In the following situations, the smart entry &...
Page 44 1-2. Opening, closing and locking the doors Note for electronic key operation   Do not get the electronic key too close to the vehicle when operating the system from the outside of the vehicle. Depending on the position and holding conditions of the electronic key, the key may not be detected cor- rectly and the system may not operate properly.
Page 45 1-2. Opening, closing and locking the doors Note for door locking operation   When touching a lock sensor to lock the doors while wearing gloves, the response may be slow or the doors may not be locked. In this case, touch the lock sensor without wearing a glove.
Page 46 1-2. Opening, closing and locking the doors Alarms and warning indicators  A combination of exterior and interior alarms as well as warning lights are used to prevent theft of the vehicle and unforeseeable accidents resulting from erroneous operation. Take appropriate measures for the warning light that comes on.
Page 47 When the electronic key battery is fully depleted P. 357  Customization that can be configured at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional Settings (e.g. smart entry & start system) can be deactivated.
Page 48 1-2. Opening, closing and locking the doors Certification for the smart entry & start system  Hereby, Toyota Motor Corporation, declares that this TMLF8-5 is in compliance with the essential requirements and other relevant pro- visions of Directive 1999/5/EC. iQ_WE_74014E...
Page 49 1-2. Opening, closing and locking the doors iQ_WE_74014E...
Page 50 1-2. Opening, closing and locking the doors iQ_WE_74014E...
Page 51 1-2. Opening, closing and locking the doors iQ_WE_74014E...
Page 52 1-2. Opening, closing and locking the doors Hereby, Tokai Rika Co., Ltd., declares that this B74EA is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. iQ_WE_74014E...
Page 53 1-2. Opening, closing and locking the doors iQ_WE_74014E...
Page 54 1-2. Opening, closing and locking the doors iQ_WE_74014E...
Page 55 1-2. Opening, closing and locking the doors iQ_WE_74014E...
Page 56 1-2. Opening, closing and locking the doors Hereby, Tokai Rika Co., Ltd., declares that this B72UA is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. iQ_WE_74014E...
Page 57 1-2. Opening, closing and locking the doors iQ_WE_74014E...
Page 58 1-2. Opening, closing and locking the doors iQ_WE_74014E...
Page 59 1-2. Opening, closing and locking the doors iQ_WE_74014E...
Page 60 (P. 41) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask any authorized Toyota dealer or repairer, or another duly qualified and equipped professional for details, such as the frequency of radio waves and timing of emitting the radio waves.
Page 61 1-2. Opening, closing and locking the doors NOTICE  Conditions affecting operation The smart entry & start system uses weak radio waves. In the following situ- ations, the communication between the electronic key and the vehicle may be affected, preventing the smart entry & start system and wireless remote control from operating properly.
Page 62: Wireless Remote Control
1-2. Opening, closing and locking the doors Wireless remote control The wireless remote control can be used to lock and unlock the vehi- cle from outside the vehicle. Vehicles without smart entry & start system Locks all doors Unlocks all doors Vehicles with smart entry &...
Page 63 1-2. Opening, closing and locking the doors  Operation signals The emergency flashers flash to indicate that the doors have been locked/ unlocked. (Locked: Once; Unlocked: Twice)  Door lock buzzer (vehicles with smart entry & start system) If a door is not fully closed, a buzzer sounds continuously if an attempt to lock the door is made.
Page 64 Vehicles with smart entry & start system P. 61  Customization that can be configured at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional Settings (e.g. unlocking function using a key) can be changed. (Customizable features P. 459)
Page 65 1-2. Opening, closing and locking the doors Certification for wireless remote control  The DECLARATION of CONFORMITY (DoC) is available at the following address: http://www.tokai-rika.co.jp/pc/ iQ_WE_74014E...
Page 66 1-2. Opening, closing and locking the doors iQ_WE_74014E...
Page 67 1-2. Opening, closing and locking the doors iQ_WE_74014E...
Page 68 1-2. Opening, closing and locking the doors Hereby, Tokai Rika Co., Ltd., declares that this B41RA is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. iQ_WE_74014E...
Page 69 1-2. Opening, closing and locking the doors iQ_WE_74014E...
Page 70 1-2. Opening, closing and locking the doors iQ_WE_74014E...
Page 71 1-2. Opening, closing and locking the doors iQ_WE_74014E...
Page 72: Side Doors
1-2. Opening, closing and locking the doors Side doors The vehicle can be locked and unlocked using the entry function, wireless remote control, key or door lock switch.  Entry function (vehicles with smart entry & start system) P. 39 ...
Page 73 1-2. Opening, closing and locking the doors  Door lock switch Unlocks all doors Locks all doors  Inside door lock button Locks the door Unlocks the door Pulling the door handle can open the driver’s door even if the lock button is in the lock position.
Page 74 1-2. Opening, closing and locking the doors CAUTION  To prevent an accident Observe the following precautions while driving the vehicle. Failing to do so may result in a door opening and an occupant falling out, resulting in death or serious injury. ...
Page 75: Back Door
1-2. Opening, closing and locking the doors Back door The back door can be locked/unlocked and opened by the following procedures.  Locking and unlocking the back door Door lock switch P. 73 Entry function (vehicles with smart entry & start system) P.
Page 76 1-2. Opening, closing and locking the doors  When closing the back door Lower the back door using the back door handle, and make sure to push the back door down from the outside to close it. CAUTION  Caution while driving ...
Page 77 1-2. Opening, closing and locking the doors CAUTION  Operating the back door Observe the following precautions. Failure to do so may cause parts of the body to be caught, resulting in seri- ous injury.  Remove any heavy loads, such as snow and ice, from the back door before opening it.
Page 78 If a bicycle carrier or similar heavy object is attached to the back door, it may suddenly shut again after being opened, causing someone’s hands, head or neck to be caught and injured. When installing an accessory part to the back door, using a genuine Toyota part is recommended. NOTICE Back door damper stays ...
Page 79: Front Seats
1-3. Adjustable components (seats, mirrors, steering wheel) Front seats Type A Seat position adjustment lever Seatback angle adjustment lever Seatback angle adjustment lever (passenger’s seat only) iQ_WE_74014E...
Page 80 1-3. Adjustable components (seats, mirrors, steering wheel) Type B Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever  Moving the front passenger’s seat For easy access to the rear seat. Lift up the seatback angle adjustment lever. When the seatback is folded to the forward limit, the seat can slide back and forth.
Page 81 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION  Seat adjustment  When sliding the seat rearward, make sure not to squash the legs of the rear passengers.  Do not recline the seat more than necessary when the vehicle is in motion to reduce the risk of sliding under the lap belt.
Page 82: Rear Seats
1-3. Adjustable components (seats, mirrors, steering wheel)  Rear seats  Folding down rear seatbacks Stow the seat belt buckles. Pull the lock release lever and fold down the seatback until it reaches the position where the head restraints can be removed.
Page 83 1-3. Adjustable components (seats, mirrors, steering wheel) Fold down the seatbacks. Stow head restraints between seatbacks and seat cushion as shown.  Tumbling rear seat cushion Pull the strap horizontally as shown. The latch under the seat cushion will release, allowing the seat cushion to be raised.
Page 84 1-3. Adjustable components (seats, mirrors, steering wheel) Anchor the strap to the head restraint. When returning the rear seat, put the strap back to the origi- nal place. CAUTION Observe the following precautions. Failure to do so may result in death or serious injury. When operating the rear seat ...
Page 85 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION  Head restraint precautions Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury.  Use the head restraints designed for each respective seat. ...
Page 86: Seat Belts
1-3. Adjustable components (seats, mirrors, steering wheel) Seat belts Make sure that all occupants are wearing their seat belts before driv- ing the vehicle.  Correct use of the seat belts  Extend the shoulder belt so that it comes fully over the shoulder, does come into contact with the...
Page 87 1-3. Adjustable components (seats, mirrors, steering wheel) Releasing the belt Press the release button. Stowing the seat belts (rear seat) When not using the seat belt, follow the method and hook the plate into the seat belt holder to fasten the seat belt. Flip the plate Hook the plate into the seat belt holder...
Page 88 1-3. Adjustable components (seats, mirrors, steering wheel) Seat belt pretensioners (front seats) The pretensioner helps the seat belt to quickly restrain the occu- pant by retracting the seat belt when the vehicle is subjected to certain types of severe frontal collision.
Page 89 Each seat belt should be used by one person only. Do not use a seat belt for more than one person at once, including children.  Toyota recommends that children be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system. ...
Page 90 If the pretensioner has activated, the SRS warning light will come on. In that case, the seat belt cannot be used again and must be replaced at any autho- rized Toyota dealer or repairer, or another duly qualified and equipped pro- fessional.
Page 91: Steering Wheel
1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel The steering wheel can be adjusted to a comfortable position. Hold the steering wheel and press the lever down. Adjust to the ideal position by moving the steering wheel vertically. After adjustment, pull the lever up to secure the steering wheel.
Page 92: Anti-Glare Inside Rear View Mirror
1-3. Adjustable components (seats, mirrors, steering wheel) Anti-glare inside rear view mirror Glare from the headlights of vehicles behind can be reduced by using the following functions. Manual anti-glare inside rear view mirror Normal position Anti-glare position iQ_WE_74014E...
Page 93 1-3. Adjustable components (seats, mirrors, steering wheel) Auto anti-glare inside rear view mirror In AUTO mode, a sensor is used to detect the headlights of vehi- cles behind and automatically reduces the reflected light. Turns automatic mode on/off The indicator comes on when automatic mode is turned on.
Page 94 1-3. Adjustable components (seats, mirrors, steering wheel)  To prevent sensor error (vehicles with auto anti-glare inside rear view mirror) To ensure that the sensors operate prop- erly, do not touch or cover them. CAUTION  Caution while driving Do not adjust the position of the mirror while driving. Doing so may lead to mishandling of the vehicle and an accident, resulting in death or serious injury.
Page 95: Outside Rear View Mirrors
1-3. Adjustable components (seats, mirrors, steering wheel) Outside rear view mirrors Mirror angle can be adjusted using the switch. Type A Select a mirror to adjust. (L: left or R: right) Adjust the mirror up, down, in or out using the switch. iQ_WE_74014E...
Page 96 1-3. Adjustable components (seats, mirrors, steering wheel) Type B Select a mirror to adjust. (L: left or R: right) Adjust the mirror up, down, in or out using the switch. iQ_WE_74014E...
Page 97 1-3. Adjustable components (seats, mirrors, steering wheel) Folding back the mirrors From the outside of the vehicle Push backward to fold the mir- rors. From the inside of the vehicle (if equipped) Fold/extend iQ_WE_74014E...
Page 98 1-3. Adjustable components (seats, mirrors, steering wheel)  Mirror angle can be adjusted when Vehicles without smart entry & start system The engine switch is in the ACC or ON position. Vehicles with smart entry & start system The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode.
Page 99 1-3. Adjustable components (seats, mirrors, steering wheel) NOTICE  If ice should jam the mirror Do not operate the control or scrape the mirror face. Use a spray de-icer to free the mirror. iQ_WE_74014E...
Page 100: The Windows Power Windows
1-4. Opening and closing the windows Power windows The power windows can be opened and closed using the following switches. Driver’s power window switches Closing One-touch closing Opening One-touch opening : To stop the window partway, operate the switch in the oppo- site direction.
Page 101 1-4. Opening and closing the windows  The power windows can be operated when Vehicles without smart entry & start system The engine switch is in the ON position. Vehicles with smart entry & start system The “ENGINE START STOP” switch is in IGNITION ON mode. ...
Page 102 If you release the switch while the window is moving, start again from the beginning. If the window continues to close but then re-open slightly even after performing the above procedure correctly, have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. CAUTION ...
Page 103: Opening The Fuel Tank Cap
1-5. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap.  Before refueling the vehicle Vehicles without smart entry & start system Turn the engine switch off and ensure that all the doors and windows are closed.
Page 104 1-5. Refueling Turn the fuel tank cap slowly to open it. Hang the fuel tank cap on the back of the fuel filler door. iQ_WE_74014E...
Page 105  Use of ethanol blended gasoline in a gasoline engine Toyota allows the use of ethanol blended gasoline where the ethanol content is up to 10%. Make sure that the ethanol blended gasoline to be used has a Research Octane Number that follows the above.
Page 106  When replacing the fuel cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury. iQ_WE_74014E...
Page 107 1-5. Refueling NOTICE  Refueling Do not spill fuel during refueling. Doing so may damage the vehicle, such as causing the exhaust systems to operate abnormally or damaging fuel system components or the vehicle’s painted surface. iQ_WE_74014E...
Page 108: Engine Immobilizer System
1-6. Theft deterrent system Engine immobilizer system The vehicle’s keys have built-in transponder chips that prevent the engine from starting if the key has not been previously registered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehicle. Vehicles without smart entry &...
Page 109 1-6. Theft deterrent system Engine immobilizer certification  Hereby, Toyota Motor Corporation, declares that this TMIMB-1 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. iQ_WE_74014E...
Page 110 1-6. Theft deterrent system iQ_WE_74014E...
Page 111 1-6. Theft deterrent system iQ_WE_74014E...
Page 112 1-6. Theft deterrent system iQ_WE_74014E...
Page 113 1-6. Theft deterrent system Hereby, Tokai Rika Co., Ltd., declares that this RI-20BTY is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. iQ_WE_74014E...
Page 114 1-6. Theft deterrent system iQ_WE_74014E...
Page 115 1-6. Theft deterrent system iQ_WE_74014E...
Page 116 1-6. Theft deterrent system NOTICE  To ensure the system operates correctly Do not modify or remove the system. If modified or removed, the proper operation of the system cannot be guaranteed. iQ_WE_74014E...
Page 117: Double Locking System
1-6. Theft deterrent system  Double locking system Unauthorized access to the vehicle is prevented by disabling the door unlocking function from both the interior and exterior of the vehicle. Vehicles employing this sys- tem have labels on the win- dow glass of both front doors.
Page 118 1-6. Theft deterrent system Cancelling the double locking system Using the entry function (vehicles with smart entry & start system): Hold the outside door handle on the driver side. Using the wireless remote control: Press the button. CAUTION  Double locking system precaution Never activate the double locking system when there are people in the vehi- cle, because all the doors cannot be opened from inside the vehicle.
Page 119: Alarm
1-6. Theft deterrent system  Alarm The system sounds the alarm and flashes lights when forcible entry is detected.  Triggering of the alarm The alarm is triggered in the following situations when the alarm is set.  A locked door is unlocked or opened in any way other than using the entry function (vehicles with smart entry &...
Page 120 1-6. Theft deterrent system  Deactivating or stopping the alarm Do one of the following to deactivate or stop the alarm.  Unlock the doors or back door using the entry function (vehi- cles with smart entry & start system) or wireless remote con- trol.
Page 121 1-6. Theft deterrent system  A person inside the vehicle opens a door or hood.  The battery is recharged or replaced when the vehicle is locked.  When the battery is disconnected Be sure to cancel the alarm system. If the battery is disconnected before canceling the alarm, the system may be triggered when the battery is reconnected.
Page 122: Correct Driving Posture
1-7. Safety information Correct driving posture Drive in a good posture as follows: Sit upright and well back in the seat. (P. 79) Adjust the position of the seat forward or backward to ensure the pedals can be reached easily depressed to the extent required.
Page 123 1-7. Safety information CAUTION  While driving  Do not adjust the position of the driver’s seat while driving. Doing so could cause the driver to lose control of the vehicle.  Do not place a cushion between the driver or passenger and the seatback. A cushion may prevent correct posture from being achieved, and reduce the effectiveness of the seat belt and head restraint, increasing the risk of death or serious injury to the driver or passenger.
Page 124: Srs Airbags
1-7. Safety information SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. Front airbags SRS driver airbag/front passenger airbag Can help protect the head and chest of the driver and front pas-...
Page 125 1-7. Safety information Side and curtain shield airbags SRS side airbags Can help protect the torso of the front seat occupants. SRS curtain shield airbags (if equipped) Can help protect primarily the head of occupants. SRS rear window curtain shield airbag (if equipped) Can help protect primarily the head of rear occupants.
Page 126 1-7. Safety information Rear airbag sensors Seat cushion airbag (if equipped) Front airbag sensors Curtain shield airbag sen- Airbag sensor assembly sors (if equipped) Front passenger’s seat belt Curtain shield airbags buckle switch (if equipped) Rear window curtain shield Side airbags airbag (if equipped) Front passenger airbag SRS warning light...
Page 127 1-7. Safety information Vehicles with curtain shield airbags: Parts of the airbag module (steering  wheel hub, airbag cover and inflator) as well as the front seats, and parts of the front and rear pillars, roof side rail and rear roof headlining may be hot for several minutes.
Page 128 1-7. Safety information Conditions under which the SRS airbags may deploy (inflate), other  than a collision The SRS front airbags and SRS rear window curtain shield airbag (if equipped) may also deploy if a serious impact occurs to the underside of your vehicle.
Page 129 1-7. Safety information Types of collisions that may not deploy the SRS airbag  (side airbags and curtain shield airbags [if equipped]) The SRS side airbag and curtain shield airbag (if equipped) system may not activate if the vehicle is subjected to a collision from the side at certain angles, or a collision to the side of the vehicle body other than the passenger compartment.
Page 130 When to contact any authorized Toyota dealer or repairer, or another  duly qualified and equipped professional In the following cases, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional, as soon as possible. Any of the SRS airbags have been inflated.
Page 131 1-7. Safety information  Vehicles with rear window curtain shield airbag: The rear of the vehicle is dam- aged or deformed, or the vehicle was involved in an accident that was not severe enough to cause the SRS rear window curtain shield airbag to inflate. ...
Page 132 1-7. Safety information CAUTION  SRS airbag precautions Observe the following precautions regarding the airbags. Failure to do so may cause death or serious injury.  The driver and all passengers in the vehicle must wear their seat belts properly. The SRS airbags are supplemental devices to be used with the seat belts.
Page 133 An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are the safest for infants and children.
Page 134 1-7. Safety information CAUTION  SRS airbag precautions  Do not allow anyone to kneel on the passenger seat toward the door or put their head or hands outside the vehicle.  Vehicles with rear window curtain shield airbag: Do not allow anyone to kneel on the rear seat toward the back door.
Page 135 1-7. Safety information CAUTION  SRS airbag precautions  Vehicles without curtain shield airbags: Do not attach anything to areas such as the door, windshield glass or side door glass.  Vehicles with curtain shield airbags: Do not attach anything to areas such as the door, windshield glass, side and back door glass, front and rear pillars, roof side rail, rear roof headlining or...
Page 136 Vehicles without curtain shield airbags: If the areas where the SRS airbags are stored, such as the steering wheel pad are damaged or cracked, have them replaced by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 137: Child Restraint Systems
General installation instructions are provided in this manual. (P. 148)  Toyota recommends that you use a child restraint system which conforms to the regulation “ECE No.44”. Types of child restraints Child restraint systems are classified into the following 5 groups according to the regulation “ECE No.44”.
Page 138 1-7. Safety information Baby seat Equal to Group 0 and 0 of “ECE No.44” Child seat Equal to Group 0 and I of “ECE No.44” Junior seat Equal to Group II and III of “ECE No.44” iQ_WE_74014E...
Page 139 1-7. Safety information Child restraint system suitability for various seating positions Provided information in the table shows your child restraint system suitability for various seating positions. Front passenger seat Seating position Rear seat Airbag manual on-off switch (vehicles with rear seat) Mass groups Up to 10 kg (22 lb.) Never put...
Page 140 1-7. Safety information Follow these procedures: • For installing a baby seat with support base If the baby seat interferes with the seatback when latching the baby seat into the support base, adjust the seatback rearward until there is no interference. •...
Page 141 1-7. Safety information Child restraint system suitability for various seating positions (with ISOFIX rigid anchor) (vehicles with rear seats) Provided information in the table shows your child restraint system suitability for various seating positions. Left-hand drive vehicles Vehicle ISOFIX positions Mass groups Size class Fixture...
Page 142 1-7. Safety information Right-hand drive vehicles Vehicle ISOFIX positions Mass groups Size class Fixture Rear outside ISO/L1 Carrycot ISO/L2 Group 0 ISO/R1 Up to 10 kg (22 lb.) ISO/R1 Group 0 ISO/R2 Up to 13 kg ISO/R3 (28 lb.) ISO/R2 ISO/R3 Group I ISO/F2...
Page 143 1-7. Safety information (1) For the child restraint system (CRS) which do not carry the ISO/ XX size class identification (A to G), for the applicable mass group, the car manufacturer shall indicate the vehicle specific ISOFIX child restraint system(s) recommended for each position Key of letters inserted in the above table: IUF: Suitable for ISOFIX forward-facing child restraint systems of uni- versal category approved for use in this mass group...
Page 144 ISOFIX child restraint system list Mass groups Size class Fixture Name Category semi- ISO/R1 TOYOTA MINI universal Up to 10 kg (22 lb.) semi- ISO/R1 TOYOTA MIDI (0 - 9 months) universal semi-...
Page 145 In an accident, the child can be crushed against the windshield, or between you and the vehicle’s interior. Vehicles with rear seat: Toyota strongly urges the use of a proper child ...
Page 146 1-7. Safety information CAUTION  Child restraint precautions  Never use a rear-facing child restraint system on the front passenger seat when the airbag manual on-off switch is ON. (P. 159) In the event of an accident, the force of the rapid inflation of the front pas- senger airbag can cause death or serious injury to the child if the rear-fac- ing child restraint system is installed on the front passenger seat when the airbag manual on-off switch is ON.
Page 147 1-7. Safety information CAUTION  When the child restraint system is not in use  Keep the child restraint system properly secured on the seat even if it is not in use. Do not store the restraint unsecured in the passenger compart- ment.
Page 148: Installing Child Restraints
1-7. Safety information Installing child restraints Follow the child restraint system manufacturer’s instructions. Firmly secure child restraints to the seats using a seat belt or ISOFIX rigid anchors. Attach the top strap when installing a child restraint. An ELR belt requires a locking clip to install a child restraint system.
Page 149 1-7. Safety information Vehicles with rear seat: Anchor brackets (for top strap) Anchor brackets are provided for the rear seats. Installing child restraints using a seat belt  Rear facing — Baby seat/child seat (Before installing on the front seat) When it is unavoidable to install the child restraint system on the front passenger seat, install the child restraint system on the front passenger seat.
Page 150 1-7. Safety information Set the airbag manual on-off switch in the OFF position. (P. 159)  Rear facing — Baby seat/child seat Place the child seat on the rear seat facing the rear of the vehi- cle. Run the seat belt through the child seat and insert the plate into the buckle.
Page 151 If your child restraint system does not provide a locking clip, you can purchase one at any authorized Toyota dealer or repairer, or another duly qualified equipped professional. Locking clip for child restraint sys- tem (Part No.
Page 152 If your child restraint system does not provide a locking clip, you can purchase one at any authorized Toyota dealer or repairer, or another duly qualified equipped professional. Locking clip for child restraint sys- tem (Part No.
Page 153 1-7. Safety information  Junior seat (Before installing on the front seat) When it is unavoidable to install the child restraint system on the front passenger seat, install the child restraint system on the front passenger seat. Adjust the seatback to the most upright position.
Page 154 1-7. Safety information Removing a child restraint installed with a seat belt Press the release button and fully retract the seat belt. Installation with ISOFIX rigid anchor (ISOFIX child restraint system) (vehicles with rear seat) Check the positions of the exclu- sive fixing bars, and install the child restraint system to the seat.
Page 155 1-7. Safety information Child restraint systems with a top strap (vehicles with rear seat) Secure the child restraint using a seat belt or ISOFIX rigid anchors. Remove the anchor bracket cover. Store the removed cover in a safe place. Latch the hook onto the anchor bracket and tighten the top strap.
Page 156 If your child restraint system does not provide a locking clip, you can purchase the fol- lowing item from any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 157 1-7. Safety information CAUTION  When installing a child restraint system  Never use a rear-facing child restraint system on the front passenger seat when the airbag manual on-off switch is ON. (P. 159) The force of the rapid inflation of the front passenger airbag can cause death or serious injury to children in the event of an accident.
Page 158 1-7. Safety information CAUTION  When installing a child restraint system  When a junior seat is installed, always ensure that the shoulder belt is positioned across the center of the child’s shoulder. The belt should be kept away from the child’s neck, but not so that it could fall off the child’s shoulder.
Page 159: Airbag Manual On-Off System
1-7. Safety information Airbag manual on-off system This system deactivates the front passenger airbag and seat cush- ion airbag. Only deactivate the airbags when using a child restraint system on the front passenger seat. Vehicles with audio system PASSENGER AIRBAG ON indicator This indicator turns on when the airbag system is ON.
Page 160 1-7. Safety information Airbag manual on-off switch Deactivating the front passenger airbag and seat cushion airbag Insert the key into the cylinder and rotate to the OFF position. The OFF indicator turns on. Without smart entry & start sys- tem: Only when the engine switch is in the ON position.
Page 161 Airbag manual on-off indicator information If any of the following problems occurs, it is possible that there is a malfunc- tion in the system. Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 162 1-7. Safety information iQ_WE_74014E...
Page 163 When driving 2-1. Driving procedures 2-4. Using other driving systems Driving the vehicle .... 164 Driving assist systems ..224 Engine (ignition) switch (vehicles without smart 2-5. Driving information entry & start system)..176 Cargo and luggage ... 229 Engine (ignition) switch Winter driving tips .....
Page 164: Driving The Vehicle
2-1. Driving procedures Driving the vehicle The following procedures should be observed to ensure safe driv- ing.  Starting the engine P. 176, 179  Driving Multidrive With the brake pedal depressed, shift the shift lever to D. (P. 185) Release the parking brake.
Page 165 2-1. Driving procedures If necessary, set the parking brake. When the vehicle is stopped for an extended period of time, shift the shift lever to N. (P. 189)  Parking the vehicle Multidrive With the shift lever in D, depress the brake pedal. Set the parking brake.
Page 166 2-1. Driving procedures Starting on a steep uphill Multidrive With the brake pedal depressed, firmly set the parking brake and shift the shift lever to D. Gently depress the accelerator pedal. Release the parking brake. Manual transmission With the parking brake firmly set and the clutch pedal fully depressed, shift the shift lever to 1.
Page 167 The vehicle is judged to be driving uphill or downhill  When the accelerator pedal is released  Breaking in your new Toyota To extend the life of the vehicle, the following precautions are recommended to observe:  For the first 300 km (186 miles): Avoid sudden stops.
Page 168 Large amounts of exhaust in the vehicle can cause driver drowsiness and an accident, resulting in death or a serious health hazard. Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately. ...
Page 169 2-1. Driving procedures CAUTION  When driving the vehicle  Do not shift the shift lever to R while the vehicle is moving forward. Doing so can damage the transmission and may result in a loss of vehicle control.  Do not shift the shift lever to D (Multidrive) or 1 (manual transmission) while the vehicle is moving backward.
Page 170 2-1. Driving procedures CAUTION  When driving on slippery road surfaces  Sudden braking, acceleration and steering may cause tire slippage and reduce your ability to control the vehicle, resulting in an accident.  Sudden changes in engine speed, such as engine braking caused by up- shifting or down-shifting, may cause the vehicle to skid, resulting in an accident.
Page 171 The exhaust should be checked occasionally. If there is a hole or crack caused by corrosion, damage to a joint or abnormal exhaust noise, be sure to have the vehicle inspected and repaired by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 172 2-1. Driving procedures CAUTION  When taking a nap in the vehicle Always turn the engine off. Otherwise, you may accidentally move the shift lever or depress the accelerator pedal, which could cause an accident or fire due to engine overheating. Additionally, if the vehicle is parked in a poorly ventilated area, exhaust gases may collect and enter the vehicle, leading to death or a serious health hazard.
Page 173 2-1. Driving procedures NOTICE  When driving the vehicle Vehicles with a Multidrive  Do not depress the accelerator and brake pedals at the same time during driving, as this may restrain driving torque.  Do not use the accelerator pedal or depress accelerator and brake pedals together to hold the vehicle on a hill.
Page 174 NOTICE  If you hear a squealing or scraping noise (brake pad wear indicators) Have the brake pads checked and replaced by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional, as soon as possible. The rotor damage can result if the pads are not replaced when needed.
Page 175 Engine damage caused by water immersion  In the event that you drive on a flooded road or the vehicle is flooded, be sure to have any authorized Toyota dealer or repairer, or another duly quali- fied and equipped professional check the following. ...
Page 176 2-1. Driving procedures Engine (ignition) switch (vehicles without smart entry & start system)  Engine switch LOCK The steering wheel is locked and the key can be removed. (Vehicles with a Multidrive: The key can be removed only when the shift lever is in P.) Some electrical components such as the audio system can be used.
Page 177 2-1. Driving procedures  Turning the key from ACC to LOCK Shift the shift lever to P (Multid- rive) or N (manual transmission). (P. 185189) Push in the key and turn to the LOCK position.  Steering lock release When starting the engine, the engine switch may seem stuck in the LOCK posi- tion.
Page 178 2-1. Driving procedures NOTICE  To prevent battery discharge Do not leave the engine switch in the ACC or ON position for long periods if the engine is not running.  When starting the engine  Do not crank for more than 30 seconds at a time. This may overheat the starter and wiring systems.
Page 179 2-1. Driving procedures Engine (ignition) switch (vehicles with smart entry & start system) Performing the following operations when carrying the electronic key on your person starts the engine or changes “ENGINE START STOP” switch modes.  Starting the engine Multidrive Check that the parking brake is set.
Page 180 2-1. Driving procedures Manual transmission Check that the parking brake is set. Check that the shift lever is set in N. Sit in the driver’s seat and firmly depress the clutch pedal. The “ENGINE START STOP” switch indicator turns green. If the indicator does not turn green, the engine cannot be started.
Page 181 2-1. Driving procedures  Changing “ENGINE START STOP” switch mode Modes can be changed by pressing the “ENGINE START STOP” switch with the brake pedal (vehicles with a Multidrive) or clutch pedal (vehicles with a manual transmission) released. (The mode changes each time the switch is pressed.) Emergency flashers can be used.
Page 182 If the engine does not start P. 423  When the “ENGINE START STOP” switch indicator flashes in amber The system may be malfunctioning. Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional, immediately. iQ_WE_74014E...
Page 183 2-1. Driving procedures Auto power OFF function  Multidrive If the vehicle is left in ACCESSORY mode for more than 20 minutes or IGNITION ON mode (the engine is not running) for more than an hour with the shift lever in P, the “ENGINE START STOP” switch will automati- cally turn off.
Page 184 “ENGINE START STOP” switch operation If you feel something catching or sense irregular resistance when operating the “ENGINE START STOP” switch, then there may be a malfunction. Imme- diately contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. iQ_WE_74014E...
Page 185: Multidrive
2-1. Driving procedures  Multidrive Select a shift position appropriate for the driving conditions.  Shifting the shift lever Vehicles without 7-Speed Sport Sequential Shiftmatic mode Vehicles without smart entry & start system: While the engine switch is in the ON position, depress the brake pedal and move the shift lever.
Page 186 2-1. Driving procedures Vehicles with 7-Speed Sport Sequential Shiftmatic mode Vehicles without smart entry & start system: While the engine switch is in the ON position, depress the brake pedal and move the shift lever. Vehicles with smart entry & start system: While the “ENGINE START STOP”...
Page 187 2-1. Driving procedures  Shift position uses Function Vehicles without 7-Speed Vehicles with 7-Speed Shift position Sport Sequential Shiftmatic Sport Sequential Shiftmatic mode mode Parking the vehicle or starting the engine Reversing Neutral Normal driving “M” mode driving Engine braking Maximum engine braking : To improve fuel consumption and reduce noises, set the shift lever in D for normal driving.
Page 188 If the display does not change to “M” on an occasion other than that described above, it may indicate a malfunction in the transmission system. Have your vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately.
Page 189: Manual Transmission
2-1. Driving procedures  Manual transmission  Shifting the shift lever 5-speed models Fully depress the clutch pedal before operating the shift lever, and then release the clutch pedal slowly. 6-speed models Fully depress the clutch pedal before operating the shift lever, and then release the clutch pedal slowly.
Page 190 2-1. Driving procedures  Shifting the shift lever to R Shift the shift lever to the R position while lifting up the ring section. Gear Shift Indicator The Gear Shift Indicator display is a guide to help the driver achieve improved fuel economy and reduced exhaust emissions within limits of engine performance.
Page 191 2-1. Driving procedures  Gear Shift Indicator display The Gear Shift Indicator may not be displayed when your foot is placed on the clutch pedal.  Maximum allowable speeds Observe the following maximum allowable speeds in each gear when maxi- mum acceleration is necessary.
Page 192 2-1. Driving procedures CAUTION  Gear Shift Indicator display Refer to the display while considering actual traffic and road conditions. Fail- ure to exercise judgment may lead to an accident. NOTICE  To prevent damage to the transmission  Do not shift the shift lever to R without depressing the clutch pedal.
Page 193: Turn Signal Lever
2-1. Driving procedures Turn signal lever Left turn Right turn Move and hold the lever partway to signal a lane change. The left hand signal will flash until you release the lever. Move and hold the lever partway to signal a lane change.
Page 194: Parking Brake
2-1. Driving procedures Parking brake  Set the parking brake Fully set the parking brake while depressing the brake pedal. At this time, the indicator will come on.  Release the parking brake Slightly raise the lever Press the button Lower it completely Usage in winter time ...
Page 195 2-1. Driving procedures NOTICE  Before driving Fully release the parking brake. Driving the vehicle with the parking brake set will lead to brake components overheating, which may affect braking performance and increase brake wear. iQ_WE_74014E...
Page 196: Horn
2-1. Driving procedures Horn To sound the horn, press on or close to the mark. After adjusting the steering wheel  Make sure that the steering wheel is securely locked. The horn may not sound if the steering wheel is not securely locked. (P.
Page 197: Gauges And Meters
2-2. Instrument cluster Gauges and meters Multi-information display P. 205 Speedometer Displays the vehicle speed. Tachometer Displays the engine speed in revolutions per minute. Clock reset button P. 209 MODE button P. 206 iQ_WE_74014E...
Page 198 2-2. Instrument cluster NOTICE  To prevent damage to the engine and its components  Do not let the indicator needle of the tachometer enter the red zone, which indicates the maximum engine speed.  The engine may be overheating if the high engine coolant temperature warning light comes on.
Page 199: Indicators And Warning Lights
2-2. Instrument cluster Indicators and warning lights The indicator and warning lights on the instrument cluster and cen- ter panel inform the driver of the status of the vehicle’s various sys- tems. Instrument cluster Center panel (left-hand drive vehicles with audio system) iQ_WE_74014E...
Page 200 2-2. Instrument cluster Center panel (right-hand drive vehicles with audio system) Center panel (vehicles without audio system) iQ_WE_74014E...
Page 201 2-2. Instrument cluster  Indicators The indicators inform the driver of the operating state of the vehicle’s various systems. Turn signal indicator Slip indicator (P. 193) (P. 225) Headlight high beam VSC OFF indicator indicator (P. 212) (P. 225) Tail light indicator TRC OFF indicator (P.
Page 202 There may be a malfunction in a sys- tem if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional for details.
Page 203 There may be a malfunction in a sys- tem if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional for details.
Page 204 Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional, immediately if this occurs.
Page 205: Multi-Information Display
2-2. Instrument cluster Multi-information display The multi-information display presents the driver with a variety of driving-related information, including the current outside tempera- ture and time. Fuel gauge Displays the quantity of fuel remaining in the tank. Shift position shift range/gear display (vehicles with a Multidrive) (P.
Page 206 2-2. Instrument cluster Switch the display Display items can be switched by pressing the MODE button.  Odometer Displays the total distance the vehicle has been driven.  Trip meter A Displays the distance the vehicle has been driven since the meter was last reset. The function can be reset by pressing the MODE but- ton for longer than 1 second when the trip meter A is displayed.
Page 207 2-2. Instrument cluster  Instrument panel light control display Displays the instrument panel light control display. Pushing and holding the button for more than 1 sec- ond will adjust brightness of the instrument panel light when the tail lights are on. ...
Page 208 2-2. Instrument cluster  Setting Eco Driving Indicator Light (vehicles with a Multidrive) Eco Driving Indicator Light can be switched on and off. The display can be switched on or off by pressing the MODE button for longer than 1 second. ...
Page 209 2-2. Instrument cluster Eco Driving Indicator Zone Display (vehicles with a Multidrive)  The range of accelerator pedal operation that will allow Eco-friendly operation (Eco driving) and the current accelerator open- ing are displayed. When the vehicle is operating within the Eco driving range, Eco Driving Indicator Light ( ) illumi- nates.
Page 210 2-2. Instrument cluster Press the clock reset button to adjust the minutes. After adjusting the minutes, wait 5 seconds to allow the minutes to be automatically input. Press the clock reset button to adjust the hours. After adjusting the hours, wait 5 seconds to allow the hours to be automatically input and the mode to return to normal.
Page 211: Headlight Switch
2-3. Operating the lights and wipers Headlight switch The headlights can be operated manually or automatically. The front position, tail, license plate instrument panel lights turn on. The headlights and all lights listed above turn The headlights, front (if equipped) position lights other lights turn on...
Page 212 2-3. Operating the lights and wipers Turning on the high beam headlights With the headlights on, push the lever forward to turn on the high beams. Pull the lever back to the center position to turn the high beams off. Pull the lever toward you to turn on the high beams.
Page 213 2-3. Operating the lights and wipers  Guide to dial settings Dial position Loading condition 4-seater (vehicles 2-seater (vehicles with rear seat) without rear seat) Driver only Driver + one passenger in front seat Driver + one passenger in front seat, and all passen- gers in the rear seats farthest to rear All passengers...
Page 214 2-3. Operating the lights and wipers  Daytime running light system (if equipped) To make your vehicle more visible to other drivers, the headlights and tail lights turn on automatically whenever the engine is started. (However, the daytime running light system will be cancelled when the headlight switch is operated manually or the automatic headlight system turns on the tail lights.) Daytime running lights are not designed for use at night.
Page 215 A buzzer sounds when the “ENGINE START STOP” switch is turned OFF or switched to ACCESSORY mode and the driver’s door is opened while the lights are turned on. Customization that can be configured at any authorized Toyota dealer  or repairer, or another duly qualified and equipped professional Settings of the light sensor sensitivity can be changed.
Page 216: Fog Light Switch
2-3. Operating the lights and wipers Fog light switch The fog lights improve visibility in difficult driving conditions, such as in rain or fog. The fog lights can be used when the headlights or front position lights are turned on. (Vehicles with a front and rear fog light switch: The rear fog lights can be used when the front fog lights are turned on.) Front and rear fog light switch...
Page 217 2-3. Operating the lights and wipers Rear fog light switch Rear fog light on iQ_WE_74014E...
Page 218: Windshield Wipers And Washer
2-3. Operating the lights and wipers Windshield wipers and washer  Intermittent wiper Intermittent windshield wiper operation Low speed windshield wiper operation High speed windshield wiper operation Temporary operation Washer/wiper dual opera- tion Wipers will automatically oper- ate a couple of times after the washer squirts.
Page 219 2-3. Operating the lights and wipers  Rain-sensing windshield wipers (if equipped) With “AUTO” selected, the wipers will operate automatically when the sensor detects falling rain. The system automatically adjusts wiper timing in accordance with rain volume and vehicle speed. Rain-sensing wiper opera- tion Low speed windshield wiper...
Page 220 2-3. Operating the lights and wipers Washer/wiper dual opera- tion Wipers will automatically oper- ate a couple of times after the washer squirts.  The windshield wiper and washer can be operated when Vehicles without smart entry & start system The engine switch is in the ON position.
Page 221 2-3. Operating the lights and wipers Vehicles without smart entry & start system:  If the wiper switch is turned to AUTO position while the engine switch is in the ON position, the wiper will operate once to show that AUTO mode is activated.
Page 222: Rear Window Wiper And Washer
2-3. Operating the lights and wipers Rear window wiper and washer Vehicles with intermittent wiper Intermittent window wiper operation Normal window wiper oper- ation Washer/wiper dual opera- tion Washer operation iQ_WE_74014E...
Page 223 2-3. Operating the lights and wipers Vehicles without intermittent wiper Normal window wiper oper- ation Washer/wiper dual opera- tion Washer operation  The rear window wiper and washer can be operated when Vehicles without smart entry & start system The engine switch is in the ON position. Vehicles with smart entry &...
Page 224: Driving Assist Systems
2-4. Using other driving systems Driving assist systems To help enhance driving safety and performance, the following sys- tems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehicle. ...
Page 225 2-4. Using other driving systems When the TRC/VSC systems are operating The slip indicator will flash while the TRC/VSC systems are oper- ating. To disable TRC and/or VSC systems If the vehicle gets stuck in fresh snow or mud, TRC and VSC systems may reduce power from the engine to the wheels.
Page 226 2-4. Using other driving systems  Automatic reactivation of TRC and VSC systems After turning the TRC and VSC systems off, the systems will be automati- cally reactivated in the following situations: Vehicles without smart entry & start system  When the engine switch is turned off ...
Page 227 2-4. Using other driving systems Reduced effectiveness of EPS  The effectiveness of EPS is reduced to prevent the system from overheating when there is frequent steering input over an extended period of time. The steering wheel may feel heavy as a result. Should this occur, refrain from excessive steering input or stop the vehicle and turn the engine off.
Page 228 The ABS and VSC systems will not function correctly if different tires are fit- ted on the vehicle. Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional for further information when replacing tires or wheels.
Page 229: Cargo And Luggage
2-5. Driving information Cargo and luggage Take notice of the following information about storage precautions, cargo capacity and load.  Stow cargo and luggage in the luggage compartment whenever possible.  Be sure all items are secured in place.  Be careful to keep the vehicle level. Placing the weight as far for- ward as possible helps maintain vehicle balance.
Page 230 2-5. Driving information CAUTION  Storage precautions  Never allow anyone to ride in the luggage compartment. It is not designed for passengers. They should ride in their seats with their seat belts prop- erly fastened. Otherwise, they are much more likely to suffer death or seri- ous bodily injury, in the event of sudden braking, sudden swerving or an accident.
Page 231: Winter Driving Tips
2-5. Driving information Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropri- ate to the prevailing weather conditions.  Pre-winter preparations  Use fluids that are appropriate to the prevailing outside tem- peratures.
Page 232 2-5. Driving information  When driving the vehicle Accelerate the vehicle slowly and drive at a reduced speed suit- able to road conditions. When parking the vehicle  Park the vehicle and move the shift lever to P (Multidrive) or to 1 or R (manual transmission) without setting the parking brake and then chock the tires.
Page 233 2-5. Driving information Selecting tire chains Use the correct tire chain size when mounting the snow chains. Chain size is regulated for each tire size. Side chain 3 mm (0.12 in.) in diameter 10 mm (0.39 in.) in width 30 mm (1.18 in.) in length Cross chain 4 mm (0.16 in.) in diameter 14 mm (0.55 in.) in width...
Page 234 2-5. Driving information CAUTION  Driving with snow tires Observe the following precautions to reduce the risk of accidents. Failing to do so may result in a loss of vehicle control and cause death or serious injury.  Use tires of the specified size. ...
Page 235: Trailer Towing
Toyota also does not recommend the installation of a tow hitch or the use of a tow hitch carrier of a wheelchair, scooter, bicycle, etc. Your Toyota is not designed for trailer towing or for the use of tow hitch mounted carriers.
Page 236 2-5. Driving information iQ_WE_74014E...
Page 237 Interior features 3-1. Using the air conditioning 3-4. Using the storage features system and defogger List of storage features ..288 • Cup holder ...... 289 Manual air conditioning • Bottle holders....289 system ......238 • Auxiliary box ....290 Automatic air conditioning system ......
Page 238: Manual Air Conditioning System
3-1. Using the air conditioning system and defogger  Manual air conditioning system Fan speed control dial Air intake selection dial Air conditioning ON/OFF button Air outlet selection dial Temperature control dial Adjusting the settings  Adjusting the temperature setting Turn the temperature control dial clockwise (warm) or counter- clockwise (cool).
Page 239 3-1. Using the air conditioning system and defogger  Adjusting the fan speed Turn the fan speed control dial clockwise (increase) or counter- clockwise (decrease). Set the dial to “0” to turn the fan off.  Selecting the air outlets Set the air outlet selection dial to an appropriate position.
Page 240 3-1. Using the air conditioning system and defogger When the dial is set to , air flows mainly to the feet. : Some models When the dial is set to , air flows to the feet and the wind- shield defogger operates. : Some models When the dial is set to , air...
Page 241 3-1. Using the air conditioning system and defogger Adjusting the position and opening and closing the air outlets Center outlets Direct air flow to the left or right, up or down. Turn the knob to open or close the vent. iQ_WE_74014E...
Page 242 3-1. Using the air conditioning system and defogger Right and left side outlets Direct air flow to the left or right, up or down. Turn the knob to open or close the vent.  Using the system in recirculated air mode The windows will fog up more easily if the recirculated air mode is used for an extended period.
Page 243 3-1. Using the air conditioning system and defogger Air conditioning odors   During use, various odors from inside and outside the vehicle may enter into and accumulate in the air conditioning system. This may then cause odor to be emitted from the vents. To reduce potential odors from occurring: ...
Page 244: Automatic Air Conditioning System
3-1. Using the air conditioning system and defogger  Automatic air conditioning system Airflow and outlets are automatically adjusted according to the tem- perature setting. Outside/recirculated Airflow display Automatic mode button air mode button Temperature Fan speed setting display display Air conditioning OFF button ON/OFF button...
Page 245 3-1. Using the air conditioning system and defogger Adjusting the settings  Adjusting the temperature setting Press The button lights up. Turn the control dial clockwise (warm) or counterclockwise (cool).  Adjusting the fan speed Press The button lights up. Turn the control dial clockwise (increase) or counterclockwise (decrease).
Page 246 3-1. Using the air conditioning system and defogger  Changing the air outlets Press The button lights up. Turn the control dial. The air outlets switch each time either side of control dial is turned. The air flow shown on the display indicates the following. When the mode is set to , air flows to the upper body.
Page 247 3-1. Using the air conditioning system and defogger When the mode is set to , air flows to the feet and the wind- shield defogger operates. : Some models  Switching between outside air and recirculated air modes Press The mode switches between (outside air mode) and (recirculated air mode) each time the button is pressed.
Page 248 3-1. Using the air conditioning system and defogger Defogging the windshield Press The indicator comes on. dehumidification function operates speed increases. Set the outside/recirculated air mode button to the outside air mode if the recirculated air mode is used. (It may switch automati- cally.) To return to the previous mode, press...
Page 249 3-1. Using the air conditioning system and defogger Adjusting the position and opening and closing the air outlets Center outlets Direct air flow to the left or right, up or down. Turn the knob to open or close the vent. iQ_WE_74014E...
Page 250 3-1. Using the air conditioning system and defogger Right and left side outlets Direct air flow to the left or right, up or down. Turn the knob to open or close the vent.  Using the automatic mode Fan speed is adjusted automatically according to the temperature setting and ambient conditions.
Page 251 3-1. Using the air conditioning system and defogger When outside air temperature approaches 0C (32F)  The air conditioning system may not operate even when is pressed.  When is selected for the air outlets used For your driving comfort, air flowing to the feet may be warmer than air flow- ing to the upper body depending on the position of the temperature adjust- ment dial.
Page 252: Rear Window Defogger
3-1. Using the air conditioning system and defogger  Rear window defogger This feature is used to defog the rear window. Vehicles with manual air conditioning system On/off Press the button to turn on the rear window defogger. The indicator will come on. Press- ing the button again also turns the defoggers off.
Page 253 3-1. Using the air conditioning system and defogger Vehicles with automatic air conditioning system On/off Press the button to turn on the rear window defogger. The indicator will come on. The defoggers will automatically turn off after approximately 15 minutes. Pressing the button again also turns the defoggers off.
Page 254: Rear View Mirror Defoggers
3-1. Using the air conditioning system and defogger  Rear window and outside rear view mirror defoggers This feature is used to defog the rear window. (Turning the rear win- dow defogger on will also turn the outside rear view mirror defog- gers on.
Page 255 3-1. Using the air conditioning system and defogger Vehicles with automatic air conditioning system On/off Press the button to turn on the rear window defogger. The indicator will come on. The defoggers will automatically turn off after approximately 15 minutes. Pressing the button again also turns the defoggers off.
Page 256 3-1. Using the air conditioning system and defogger NOTICE  To prevent battery discharge Do not leave the rear window and outside rear view mirror defoggers on lon- ger than necessary when the engine is stopped. iQ_WE_74014E...
Page 257: Audio System Type
3-2. Using the audio system  Audio system type CD player and AM/FM radio Audio display Audio switches CD slot Title Page Using the radio P. 260 Using the CD player P. 265 Playing back MP3 and WMA discs P. 272 Optimal use of the audio system P.
Page 258 3-2. Using the audio system Turning on the power Press when the audio system is turned off. The audio system can be turned off by holding the switch down until you hear two beeps. Selecting audio mode Press to select the audio mode. The audio mode changes as follows each time the button is pressed.
Page 259 3-2. Using the audio system  Using cellular phones Interference may be heard through the audio system’s speakers if a cellular phone is being used inside or close to the vehicle while the audio system is operating. NOTICE  To prevent battery discharge Do not leave the audio system on longer than necessary with the engine off.
Page 260: Using The Radio
3-2. Using the audio system  Using the radio Press several times until the FM or AM mode is displayed. Select station/ Volume Seek frequency Select mode/Power  : If equipped iQ_WE_74014E...
Page 261 3-2. Using the audio system  Setting radio menu Press and hold until you hear a beep. appears on the display. Press to select the menu. The menu changes as follows each time the button is pressed. AST (P. 262) (P.
Page 262 3-2. Using the audio system Setting station presets  Automatically Press and hold until you hear a beep. appears on the display. Press several times until “AST” is displayed. Press “ ” on to select “ON”. Up to 6 stations are set in order of reception quality. When the set- tings are finished, two beeps will be heard.
Page 263 3-2. Using the audio system RDS (Radio Data System) This feature allows your radio to receive data from radio stations that broadcast this information.  Traffic information Press and hold until you hear a beep. appears on the display. Press several times until “TP”...
Page 264 3-2. Using the audio system  EON (Enhanced Other Network) system (for traffic announcement function) If the RDS station (with EON data) you are listening to is not broadcasting a traffic information program and the audio system is in the TA (traffic announcement) mode, the radio will be switched automatically to a station broadcasting a traffic information program in the EON AF list when traffic information begins.
Page 265: Using The Cd Player
3-2. Using the audio system  Using the CD player Press several times until “CD” is displayed. CD eject CD slot Select track/ Volume fast-forwarding or reversing Select mode/Power  : If equipped iQ_WE_74014E...
Page 266 3-2. Using the audio system  Setting CD menu Press and hold until you hear a beep. appears on the display. Press to select the menu. The menu changes as follows each time the button is pressed. (P. 267) (P. 280) Repeat a track Adjusting sound quality RND (P.
Page 267 3-2. Using the audio system Loading a CD Insert a CD. Ejecting a CD Press and remove the CD. Selecting a track Press “  ” to move up or “” to move down using until the desired track number is displayed. Fast-forwarding and reversing tracks ...
Page 268 3-2. Using the audio system Random playback Press and hold until you hear a beep. appears on the display. Press several times until “RND” is displayed. Press “ ” on to select “ON”. To cancel the random play back, press “ ”...
Page 269 3-2. Using the audio system Discs that can be used  Discs with the marks shown below can be used. Playback may not be possible depending on recording format or disc fea- tures, or due to scratches, dirt or deterioration. CDs with copy-protect features may not be used.
Page 270 3-2. Using the audio system NOTICE  CDs and adapters that cannot be used Do not use the following types of CDs. Also, do not use 8 cm (3 in.) CD adapters, DualDiscs or printable discs. Doing so may damage the CD player and/or the CD insert/eject function. ...
Page 271 3-2. Using the audio system NOTICE  CD player precautions Failure to follow the precautions below may result in serious damage to the CDs or the player itself.  Do not insert anything other than CDs into the CD slot. ...
Page 272: Playing Back Mp3 And Wma Discs
3-2. Using the audio system  Playing back MP3 and WMA discs Press several times until “MP3” or “WMA” is displayed. CD eject CD slot Select Volume file and folder Select mode/Power  : If equipped iQ_WE_74014E...
Page 273 3-2. Using the audio system  Setting MP3/WMA menu Press and hold until you hear a beep. appears on the display. Press to select the menu. The menu changes as follows each time the button is pressed. RPT FILE (P. 274) (P.
Page 274 3-2. Using the audio system Loading and ejecting MP3 and WMA discs Refer to the section entitled “Using the CD player” for details. (P. 265) Selecting files Press “” or “” on to select the desired file. Selecting a folder To select the desired folder, press and hold “”...
Page 275 3-2. Using the audio system  Cancelling repeat playback Press “ ” on to select “OFF”. Random playback  To play all of the files on a disc in random order Press and hold until you hear a beep. appears on the display. Press several times until “RND”...
Page 276 3-2. Using the audio system  Display Up to 8 characters can be displayed at a time. Depending on the contents recorded, the characters may not be displayed properly or may not be displayed at all.  Error messages “ERROR”: This indicates a trouble either in the CD or inside the player.
Page 277 3-2. Using the audio system MP3 and WMA files  MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by using MP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3 format.
Page 278 3-2. Using the audio system Compatible media  Media that can be used for MP3 and WMA playback are CD-Rs and CD- RWs. Playback in some instances may not be possible, depending on the status of the CD-R or CD-RW. Playback may not be possible or the audio may jump if the disc is scratched or marked with fingerprints.
Page 279 3-2. Using the audio system MP3 and WMA playback  When a disc containing MP3 or WMA files is inserted, all files on the disc are first checked. Once the file check is finished, the first MP3 or WMA file is played.
Page 280: System
3-2. Using the audio system  Optimal use of the audio system The sound quality and bal- ance settings can be changed to produce the best sound. Adjusting sound quality and balance Press and hold until you hear a beep. appears on the display.
Page 281 3-2. Using the audio system Sound qual- Mode Level Press“ ” Press“ ” ity mode displayed Bass -5 to 5 High Treble -5 to 5 Front/rear Shifts to volume F7 to R7 Shifts to rear front balance Left/right Shifts to volume L7 to R7 Shifts to left...
Page 282: Using The Aux Port
3-2. Using the audio system  Using the AUX port This port can be used to connect a portable audio device and listen to it through the vehicle’s speakers. Open the cover and connect the portable audio device. Press several times until “AUX”...
Page 283 3-2. Using the audio system  Operating portable audio devices connected to the audio system The volume and sound quality can be adjusted using the vehicle’s audio controls. All other adjustments must be made on the portable audio device itself. ...
Page 284: Using The Steering Wheel Audio Switches
3-2. Using the audio system Using the steering wheel audio switches Audio features can be controlled using the switches on the steering wheel. Operation may differ depending on the type of audio system or navi- gation system. For details, refer to the manual provided with the audio system or navigation system.
Page 285 3-2. Using the audio system Selecting a radio station Press several times until FM or AM mode is displayed. Press “” or “” on to select a preset station. To scan for receivable stations, press and hold the switch until you hear a beep.
Page 286: Using The Interior Lights Interior Lights List
20 minutes.  Customization that can be configured at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional Settings (e.g. The time elapsed before lights turn off) can be changed.
Page 287: Interior Light
3-3. Using the interior lights Interior light Interior light Door position The interior light angle can be adjusted. iQ_WE_74014E...
Page 288: Using The Storage Features List Of Storage Features
3-4. Using the storage features List of storage features Bottle holders Cup holder Auxiliary box CAUTION  Items that should not be left in the storage spaces Do not leave glasses, lighters or spray cans in the storage spaces, as this may cause the following when cabin temperature becomes high: ...
Page 289: Cup Holder
3-4. Using the storage features Cup holder and bottle holders Cup holder CAUTION  Items unsuitable for the cup holder Do not place anything other than cups or aluminum cans in the cup holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
Page 290: Auxiliary Box
3-4. Using the storage features Bottle holders and auxiliary box Rear NOTICE  Items that should not be stowed in the bottle holders Put the cap on before stowing a bottle. Do not place open bottles in the bot- tle holders, or glasses and paper cups containing liquid. The contents may spill and glasses may break.
Page 291 3-4. Using the storage features Auxiliary box Take off the button and open the strap. Anchor the strap to the head restraint. When returning the rear seat, put the strap back to the original place. Vehicles without rear seat Open the lid. iQ_WE_74014E...
Page 292 3-4. Using the storage features Auxiliary box CAUTION Observe the following precautions. Failure to do so may result in death or seri- ous injury.  When operating the rear seat  Do not operate the seat while driving.  Stop the vehicle on level ground, set the parking brake and shift the shift lever to P (Multidrive) or 1 (manual transmission).
Page 293: Other Interior Features Sun Visors
3-5. Other interior features Sun visors Forward position: Flip down. Side position: Flip down, unhook, and swing to the side. iQ_WE_74014E...
Page 294: Vanity Mirrors
3-5. Other interior features Vanity mirrors Slide the cover. iQ_WE_74014E...
Page 295: Power Outlet
3-5. Other interior features Power outlet The power outlet can be used for 12 V accessories that run on less than 10 A.  The power outlet can be used when Vehicles without smart entry & start system The engine switch is in the ACC or ON position. Vehicles with smart entry &...
Page 296: Seat Heaters
3-5. Other interior features  Seat heaters Heats the left front seat Heats the right front seat The indicator light comes on. The seat heaters can be used when  Vehicles without smart entry & start system The engine switch is in the ON position. Vehicles with smart entry &...
Page 297 3-5. Other interior features CAUTION  Burns  Use caution when seating the following persons in a seat with the seat heater on to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the disabled •...
Page 298: Assist Grips
3-5. Other interior features Assist grips An assist grip installed on the ceiling can be used to support your body while sitting on the seat. CAUTION  Assist grip Do not use the assist grip when getting in or out of the vehicle or rising from your seat.
Page 299: Floor Mat
3-5. Other interior features Floor mat Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. Insert the retaining hooks (clips) into the floor mat eye- lets.
Page 300 When installing the driver’s floor mat  Do not use floor mats designed for other models or different model year vehicles, even if they are Toyota Genuine floor mats.  Only use floor mats designed for the driver’s seat. ...
Page 301: Luggage Compartment Features
3-5. Other interior features Luggage compartment features  Luggage box (vehicles with rear seat) Open the lid.  Warning reflector and first-aid kit holder Vehicles with rear seat Fold down the rear seat seatbacks. (P. 82) Turn the knobs and remove them.
Page 302 3-5. Other interior features First-aid kit holder Warning reflector holder Vehicles without rear seat Open the deck board. First-aid kit holder Warning reflector holder iQ_WE_74014E...
Page 303 3-5. Other interior features  When storing a warning reflector and first-aid kit The warning reflector and first-aid kit may not be able to be stored depend- ing on the size or the shape of the cases. CAUTION  Caution while driving ...
Page 304 3-5. Other interior features iQ_WE_74014E...
Page 305 Maintenance and care 4-1. Maintenance and care Cleaning and protecting the vehicle exterior ..306 Cleaning and protecting the vehicle interior ..310 4-2. Maintenance Maintenance requirements....313 4-3. Do-it-yourself maintenance Do-it-yourself service precautions ..... 316 Hood ......... 319 Positioning a floor jack..321 Replacing the tire....
Page 306: The Vehicle Exterior
4-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition.  Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
Page 307 4-1. Maintenance and care Aluminum wheels (if equipped)   Remove any dirt immediately by using a neutral detergent. Do not use hard brushes or abrasive cleaners. Do not use strong or harsh chemical cleaners. Use the same mild detergent and wax as used on the paint. Do not use detergent on the wheels when they are hot, for example after ...
Page 308 4-1. Maintenance and care NOTICE  To prevent paint deterioration and corrosion on the body and compo- nents (aluminum wheels etc.)  Wash the vehicle immediately in the following cases: • After driving near the sea coast • After driving on salted roads •...
Page 309 4-1. Maintenance and care NOTICE  When using an automatic car wash (vehicles with rain-sensing windshield wipers) Set the wiper switch to off. If the wiper switch is in AUTO, the wipers may operate and the wiper blades may be damaged. iQ_WE_74014E...
Page 310: Cleaning And Protecting The Vehicle Interior
4-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle’s interior and keep it in top condition:  Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty sur- faces with a cloth dampened with lukewarm water.
Page 311 4-1. Maintenance and care  Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior.  Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam.
Page 312 4-1. Maintenance and care NOTICE  Cleaning detergents  Do not use organic substances such as benzene or gasoline, acidic or alkaline solutions, dye, bleach or other detergent. Doing so may discolor the vehicle interior or cause streaks or damage to painted surfaces. ...
Page 313: Maintenance Requirements
Toyota dealer or repairer, or another duly qualified and equipped profes- sional. Any authorized Toyota dealer or repairer will keep a record of maintenance, which could be useful should you ever require Warranty Service.
Page 314 There can also be advantages in utilizing authorized Toyota dealers or repairers for non-warranty repairs and services, as members of the Toyota network will be able to expertly assist you with any difficulties you may encounter. Any authorized Toyota dealer or repairer, or another duly qualified and...
Page 315  Engine coolant temperature continually higher than normal If you notice any of these clues, take your vehicle to any authorized Toyota dealer or repairer, or another duly qualified and equipped professional, as soon as possible. Your vehicle may need adjustment or repair.
Page 316: Do-It-Yourself Service Precautions
• Baking soda Battery condition (P. 342) • Grease • Conventional wrench (for terminal clamp bolts) • Toyota Super Long Life Coolant or similar high quality ethylene glycol based non-silicate, non- amine, non-nitrite and non-borate coolant with long-life hybrid Engine coolant level (P.
Page 317 4-3. Do-it-yourself maintenance CAUTION The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury, observe the following precautions. When working on the engine compartment   Keep hands, clothing, and tools away from the moving fan and engine drive belt.
Page 318 4-3. Do-it-yourself maintenance NOTICE  If you remove the air cleaner Driving with the air cleaner removed may cause excessive engine wear due to dirt in the air.  If the fluid level is low or high It is normal for the brake fluid level to go down slightly as the brake pads wear or when the fluid level in the accumulator is high.
Page 319: Hood
4-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood lock release lever. The hood will pop up slightly. Pull up the auxiliary catch lever and lift the hood. Hold the hood open by insert- ing the supporting rod into the slot.
Page 320 4-3. Do-it-yourself maintenance CAUTION  Pre-driving check Check that the hood is fully closed and locked. If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury. ...
Page 321: Positioning A Floor Jack
4-3. Do-it-yourself maintenance Positioning a floor jack When raising your vehicle with a floor jack, position the jack cor- rectly. Improper placement may damage your vehicle or cause injury.  Front  Rear iQ_WE_74014E...
Page 322 4-3. Do-it-yourself maintenance CAUTION  When raising your vehicle Make sure to observe the following to reduce the possibility of death or seri- ous injury.  Lift up the vehicle using a floor jack such as the one shown in the illustra- tion.
Page 323 4-3. Do-it-yourself maintenance CAUTION  When raising your vehicle  When raising the vehicle, do not place any objects on top of or underneath the floor jack. iQ_WE_74014E...
Page 324: Replacing The Tire
4-3. Do-it-yourself maintenance Replacing the tire When raising your vehicle with a jack, position the jack correctly. Improper placement may damage your vehicle or cause injury.  Before jacking up the vehicle  Stop the vehicle on a hard, flat surface. ...
Page 325 4-3. Do-it-yourself maintenance Taking out the jack Vehicles with rear seat Pull the strap horizontally as shown. The latch under the seat cushion will release, allowing the seat cushion to be raised. Take off the button and open the strap. Anchor the strap to the head restraint.
Page 326 4-3. Do-it-yourself maintenance Remove the auxiliary box. Loosen and remove the jack. Loosen Tighten Vehicles without rear seat Open the lid. Remove the auxiliary box. iQ_WE_74014E...
Page 327 4-3. Do-it-yourself maintenance Loosen and remove the jack. Loosen Tighten Replacing a tire Chock the tires. Wheel chock Tire position positions Behind and Left- in front of hand the rear side right-hand side tire Front Behind and Right- in front of hand the rear side...
Page 328 4-3. Do-it-yourself maintenance Slightly loosen the wheel nuts (one turn). Check the jack point. Turn the jack portion “A” by hand until the notch of the jack is in contact with the jack point. Outer iQ_WE_74014E...
Page 329 4-3. Do-it-yourself maintenance Raise the vehicle until the tire is slightly raised off the ground. Remove all the wheel nuts and the tire. When resting the tire on the ground, place the tire so that the wheel design faces up to avoid scratching the wheel surface.
Page 330 4-3. Do-it-yourself maintenance Install the tire and loosely tighten each wheel nut by hand by approximately the same amount. Tighten the nuts until the wash- Disc wheel ers comes into loose contact with the disc wheel sheet. Washer Lower the vehicle. Firmly tighten each nut two or three times in the order shown in the illustration.
Page 331 4-3. Do-it-yourself maintenance  Certification for the jack iQ_WE_74014E...
Page 332 4-3. Do-it-yourself maintenance CAUTION  Using the jack Improper use of the jack may lead to death or serious injuries due to the vehicle suddenly falling off the jack.  Do not use the jack for any purpose other than replacing tires or installing and removing tire chains.
Page 333 4-3. Do-it-yourself maintenance CAUTION  When installing the wheel nuts  Be sure to install the wheel nuts with Tapered the tapered end facing inward. Install- portion ing the nuts with the tapered end facing outward can cause wheel to break and eventually cause a wheel to come off while driving, which could lead to an accident resulting in death or serious...
Page 334: Engine Compartment
4-3. Do-it-yourself maintenance Engine compartment 1KR-FE engine Washer fluid tank (P. 346) Radiator (P. 342) Engine oil level dipstick Electric cooling fan (P. 336) Condenser (P. 342) Engine oil filler cap Engine coolant reservoir (P. 337) (P. 340) Battery (P. 342) Fuse box (P.
Page 335 4-3. Do-it-yourself maintenance 1NR-FE engine Washer fluid tank (P. 346) Radiator (P. 342) Engine oil filler cap Electric cooling fan (P. 337) Condenser (P. 342) Engine oil level dipstick Engine coolant reservoir (P. 336) (P. 340) Battery (P. 342) Fuse box (P.
Page 336 4-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick.  Checking the engine oil Park the vehicle on level ground. After turning off the engine, wait more than 5 minutes for the oil to drain back into the bot- tom of the engine.
Page 337 4-3. Do-it-yourself maintenance Holding a rag under the end, pull the dipstick out and check the oil level. Flat dipstick type A Normal Excessive The shape of the dipstick may differ depending on the type of vehicle or engine. Flat dipstick type B Normal Excessive The shape of the dipstick may...
Page 338 4-3. Do-it-yourself maintenance 1NR-FE engine Make sure to check the oil type and prepare the items needed before adding oil. P. 450 Engine oil selection Items Clean funnel Remove the oil filler cap, turning it counterclockwise. Add engine oil slowly. Checking the dipstick.
Page 339 Dispose of used oil and filters only in a safe and acceptable manner. Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Call any authorized Toyota dealer or repairer, or another duly qualified and equipped professional, service station or auto parts store for information concerning recycling or disposal.
Page 340 4-3. Do-it-yourself maintenance NOTICE  To prevent serious engine damage Check the oil level on regular basis.  When replacing the engine oil  Be careful not to spill engine oil on the vehicle components.  Avoid overfilling, as the engine could be damaged. ...
Page 341 Visually check the radiator, hoses, reservoir cap, radiator cap, drain cock and water pump. If you cannot find a leak, have any authorized Toyota dealer or repairer, or another duly qualified and equipped professional, test the cap and check for leaks in the cooling system.
Page 342 Check the radiator and condenser and clear any foreign objects. If any of the above parts are extremely dirty or you are not sure of their condition, have your vehicle checked by any authorized Toyota dealer or repairer, or another duly qualified and equipped profes- sional.
Page 343 4-3. Do-it-yourself maintenance  Battery exterior Make sure that the battery terminals are not corroded and that there are no loose connections, cracks, or loose clamps. Terminals Hold-down clamp  Checking battery fluid Check that the level is between UPPER and LOWER. UPPER LOWER If the fluid level is at or below...
Page 344 4-3. Do-it-yourself maintenance  Before recharging When recharging, the battery produces hydrogen gas which is flammable and explosive. Therefore, before recharging:  If recharging with the battery installed on the vehicle, be sure to discon- nect the ground cable.  Make sure the power switch on the charger is off when connecting and disconnecting the charger cables to the battery.
Page 345 4-3. Do-it-yourself maintenance CAUTION  Emergency measures regarding electrolyte  If electrolyte gets in your eyes Flush your eyes with clean water for at least 15 minutes and get immedi- ate medical attention. If possible, continue to apply water with a sponge or cloth while traveling to the nearest medical facility.
Page 346 4-3. Do-it-yourself maintenance Washer fluid If the washer fluid level is at LOW, add washer fluid.  Using the gauge The washer fluid level can be checked by observing the position of the level on the liquid -covered holes in the gauge. If the level falls below the second hole Current fluid level...
Page 347: Tires
” marks, etc., molded on the sidewall of each tire.  Tire rotation Rotate the tires in the order shown. To equalize tire wear and help extend tire life, Toyota recom- mends that you rotate your Front tires approximately every 10000 km (6000 miles).
Page 348 A tire goes flat repeatedly or cannot be properly repaired due to the size or location of a cut or other damage If you are not sure, consult with any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 349 4-3. Do-it-yourself maintenance NOTICE  Driving on rough roads Take particular care when driving on roads with loose surfaces or potholes. These conditions may cause losses in tire inflation pressure, reducing the cushioning ability of the tires. In addition driving on rough roads may cause damage to the tires themselves, as well as the vehicle’s wheels and body.
Page 350: Tire Inflation Pressure
 Reduced safety  Damage to the drive train If a tire needs frequent refilling, have it checked by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.  Instructions for checking tire inflation pressure When checking tire inflation pressure, observe the following: ...
Page 351 4-3. Do-it-yourself maintenance CAUTION  Proper inflation is critical to save tire performance Keep your tires properly inflated. Otherwise, the following conditions may occur and result in an accident causing death or serious injury.  Excessive wear  Uneven wear Poor handling ...
Page 352: Wheels
 Bent wheels that have been straightened  Aluminum wheel precautions (if equipped)  Use only Toyota wheel nuts and wrenches designed for use with your aluminum wheels.  When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1600 km (1000 miles).
Page 353 4-3. Do-it-yourself maintenance CAUTION  When replacing wheels  Do not use wheels that are a different size from those recommended in the Owner’s Manual, as this may result in loss of handling control.  Never use an inner tube in a leaking wheel which is designed for a tube- less tire.
Page 354: Air Conditioning Filter
4-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be cleaned or changed regularly to maintain air conditioning efficiency.  Removal method Vehicles without smart entry & start system: Turn the engine switch to the LOCK position. Vehicles with smart entry & start system: Turn the “ENGINE START STOP”...
Page 355 2 minutes at 500 kPa (5.0 kgf/cm or bar, 72 psi). If it is not available, have the filter cleaned by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.  Replacement method Remove the air conditioning filter and replace it with a new one.
Page 356 Inspect, clean and replace the air conditioning filter according to the mainte- nance schedule. In dusty areas or areas with heavy traffic flow, more fre- quent cleaning or early replacement may be required. (For scheduled maintenance information, please refer to the “Toyota Service Booklet” or “Toyota Warranty Booklet”.) ...
Page 357: Key Battery
4-3. Do-it-yourself maintenance Key battery Replace the battery with a new one if it is discharged.  You will need the following items:  Flathead screwdriver (To prevent damage to the key, cover the tip of the screwdriver with tape.) ...
Page 358 4-3. Do-it-yourself maintenance Open the case cover using a coin protected with tape etc. and remove the depleted bat- tery. Insert a new battery with the “+” terminal facing up. Vehicles with smart entry & start system Push the release button and take out the mechanical key.
Page 359 The operational range is reduced.  Use a lithium battery  Batteries can be purchased at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional, jewelers, or camera stores.  Replace only with the same or equivalent type recommended by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 360 4-3. Do-it-yourself maintenance CAUTION  Removed battery and other parts These parts are small and if swallowed by a child, they can cause choking. Keep away from children. Failure to do so could result in death or serious injury.  Certification for the key battery RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
Page 361: Checking And Replacing Fuses
4-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. Vehicles without smart entry & start system: Turn the engine switch to the LOCK position. Vehicles with smart entry &...
Page 362 4-3. Do-it-yourself maintenance Type B Push the tab in and lift the lid off. Type C (if equipped) Pinch the latches and remove the washer inlet from the bracket. Press claw remove the washer inlet from the bracket. iQ_WE_74014E...
Page 363 4-3. Do-it-yourself maintenance 2. Push the tab in and lift the lid off.  Under the instrument panel (left-hand drive vehicles) Driver’s side instrument panel Remove the lid. iQ_WE_74014E...
Page 364 4-3. Do-it-yourself maintenance  Under the instrument panel (right-hand drive vehicles) Passenger’s side instrument panel 1. Remove the cover. Use a flathead screwdriver which is wrapped with a cloth. 2. Remove the lid. After a system failure, see “Fuse layout and amperage rat- ings”...
Page 365 Replace it with one of an appropriate amperage rating. The amperage rating can be found on the fuse box lid. Type C Normal fuse Blown fuse Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. iQ_WE_74014E...
Page 366 4-3. Do-it-yourself maintenance Fuse layout and amperage ratings  Engine compartment (type A) Fuse Ampere Circuit Charging system, RDI, ABS NO.1, HTR-B, ACC, CIG, GAUGE, ECU- IG NO.1, HTR-IG, WIPER WASHER, AM1, DOOR NO.1, 120 A STOP, DOOR NO.2, OBD, RR FOG, FR FOG, DEF, TAIL NO.2, EPS, PTC NO.1, PTC NO.2, PTC NO.3, DEICER, D/L NO.1, D/L...
Page 367 4-3. Do-it-yourself maintenance  Engine compartment (type B) Fuse Ampere Circuit D/C CUT 30 A ECU-B NO.1, DOME IMMOBI 7.5 A Smart entry & start system Turn signal lights, emergency TURN & HAZ 10 A flashers ETCS 10 A Electronic throttle control system Meter, power windows, air condi- ECU-B NO.2 tioning system...
Page 368 4-3. Do-it-yourself maintenance Fuse Ampere Circuit H-LP HI 7.5 A Headlight (high beam) (STRG LOCK) 20 A Steering lock system H-LP RH 10 A Right-hand headlight DOME 15 A Interior light, audio system Main body ECU, power door lock ECU-B NO.1 7.5 A system, smart entry &...
Page 369 4-3. Do-it-yourself maintenance  Engine compartment (type C: if equipped) Fuse Ampere Circuit 30 A PTC heater (PTC NO.1) 50 A PTC heater (PTC NO.3) 30 A PTC heater (DEICER) 20 A No circuit (PWR HTR) 25 A No circuit (PTC NO.2) 30 A PTC heater...
Page 370 4-3. Do-it-yourself maintenance  Under the instrument panel Fuse Ampere Circuit Vehicle stability control system, shift lock control system, electric ECU-IG NO.1 7.5 A power steering, automatic head- light, main body ECU Electric cooling fan(s), charging system, emergency flashers, front passenger’s seat belt reminder light, back-up lights, multiport fuel GAUGE...
Page 371: License Plate Lights
4-3. Do-it-yourself maintenance Fuse Ampere Circuit Manual headlight leveling dial, front TAIL NO.1 10 A position lights, tail lights, license plate lights (PANEL NO.2) Daytime running light system DOOR NO.2 20 A Power windows Power door lock system, main body D/L NO.1 15 A DOOR NO.1...
Page 372 Do not modify the fuse or the fuse box. NOTICE  Before replacing fuses Have the cause of electrical overload determined and repaired by any autho- rized Toyota dealer or repairer, or another duly qualified and equipped pro- fessional, as soon as possible. iQ_WE_74014E...
Page 373: Light Bulbs
You may replace the following bulbs by yourself. The difficulty level of replacement varies depending on the bulb. As there is a danger that components may be damaged, we recommend that replacement is carried out by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. ...
Page 374 4-3. Do-it-yourself maintenance  Rear bulb locations Tail/stop light Rear turn signal light Back-up light/ rear fog light (Right-hand drive vehicles) License plate light Back-up light/rear fog light (Left-hand drive vehicles) Replacing light bulbs  Headlight Left side Push the tab in and lift the lid off. iQ_WE_74014E...
Page 375 4-3. Do-it-yourself maintenance Turn the cover clockwise. Turn the bulb base counterclock- wise. Unplug connector while depressing the lock release. When installing, reverse the steps listed. iQ_WE_74014E...
Page 376 4-3. Do-it-yourself maintenance Right side Pinch the latches and remove the washer inlet from the bracket. Press the claw and remove the washer inlet from the bracket. Turn the cover counterclockwise. iQ_WE_74014E...
Page 377 4-3. Do-it-yourself maintenance Turn the bulb base counterclock- wise. Unplug connector while depressing the lock release. When installing, reverse the steps listed.  Front fog lights (if equipped) Remove the front spats bolts. iQ_WE_74014E...
Page 378 4-3. Do-it-yourself maintenance Remove the fender liner clip. Slide off the fender liner. Unplug connector while depressing the lock release. Turn the bulb counterclockwise. When installing, reverse the steps listed. iQ_WE_74014E...
Page 379 4-3. Do-it-yourself maintenance  Front position lights Turn the bulb base counterclock- wise. Remove the light bulb. When installing, reverse the steps listed. iQ_WE_74014E...
Page 380 4-3. Do-it-yourself maintenance  Front turn signal lights Turn the bulb base counterclock- wise. Remove the light bulb. When installing, reverse the steps listed. iQ_WE_74014E...
Page 381 4-3. Do-it-yourself maintenance  Back-up lights/rear fog light, tail/stop lights and rear turn sig- nal lights Open the back door and remove the cover. Use a flathead screwdriver which is wrapped with a cloth. Turn the bulb bases counter- clockwise. Tail/stop light Rear turn signal light Back-up light or rear fog light...
Page 382 4-3. Do-it-yourself maintenance  License plate lights Disengage the claws. Use a flathead screwdriver which is wrapped with a cloth. Remove the license plate light. Turn the bulb base counterclock- wise. Remove the light bulb. iQ_WE_74014E...
Page 383 Condensation build-up on the inside of the lens Temporary condensation build-up on the inside of the headlight lens does not indicate a malfunction. Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional for more information in the following situations: ...
Page 384  The high mounted stoplight consist of a number of LEDs. If any of the LEDs burn out, take your vehicle to any authorized Toyota dealer or repairer, or another duly qualified and equipped professional to have the light replaced.
Page 385 When trouble arises 5-1. Essential information 5-2. Steps to take in an emergency Emergency flashers..386 If a warning light turns on If your vehicle needs or a warning buzzer to be towed ..... 388 sounds......397 If you think something If you have a flat tire ..
Page 386: Emergency Flashers
5-1. Essential information Emergency flashers Use the emergency flashers if the vehicle malfunctions or is involved in an accident. Vehicles with manual air conditioning system Press the switch to flash all the turn signal lights. To turn them off, press the switch once again.
Page 387 5-1. Essential information Vehicles with automatic air conditioning system Press the switch to flash all the turn signal lights. To turn them off, press the switch once again. NOTICE  To prevent battery discharge Do not leave the emergency flashers on longer than necessary when the engine is not running.
Page 388: If Your Vehicle Needs To Be Towed
If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional, such as or a commercial towing service, using a lift-type truck or a flat bed truck.
Page 389 5-1. Essential information Emergency towing If a tow truck is not available, in an emergency your vehicle may be temporarily towed using a cable or chain secured to the emergency towing eyelet. This should only be attempted on hard, surfaced roads for short distances at low speeds.
Page 390 5-1. Essential information CAUTION  Caution while towing  Use extreme caution when towing the vehicle. Avoid sudden starts or erratic driving maneuvers which place excessive stress on the emergency towing eyelet and the cables or chains. Always be cautious of the surroundings and other vehicles while towing. ...
Page 391 5-1. Essential information Insert the towing eyelet into the hole and tighten partially by hand. Tighten down the towing eyelet securely using a wheel nut wrench.  Location of the emergency towing eyelet P. 324 CAUTION  Installing towing eyelet to the vehicle Make sure that the towing eyelet is installed securely.
Page 392 5-1. Essential information Towing with a sling-type truck NOTICE  To prevent body damage Do not tow with a sling-type truck, either from the front or rear. Towing with a wheel lift-type truck from the front Release the parking brake. NOTICE ...
Page 393 5-1. Essential information Towing with a wheel lift-type truck from the rear Vehicles with a Multidrive: Use a towing dolly under the front wheels. Vehicles with a manual transmis- sion: We recommend the use of a towing dolly under the front wheels.
Page 394 Without adequate clearance, the vehicle could be damaged while being towed. Using a flat bed truck If your Toyota is transported by a Front flat bed truck, it should be tied down at the locations shown in the illustration.
Page 395: If You Think Something Is Wrong
5-1. Essential information If you think something is wrong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional, as soon as possible.
Page 396 5-1. Essential information Fuel pump shut off system To minimize the risk of fuel leakage when the engine stalls or an air- bag inflates upon collision, the fuel pump shut off system stops sup- plying fuel to the engine. Follow the procedure below to restart the engine after the system is activated.
Page 397: On Or A Warning Buzzer Sounds
Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous. The following warning indicates a possible problem in the brake sys- tem. Immediately stop the vehicle in a safe place and contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Warning light...
Page 398 The following warnings indicate the possibility of damage to the vehi- cle that may lead to an accident. Immediately stop the vehicle in a safe place and contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 399 5-2. Steps to take in an emergency Warning light Warning light/Details SRS warning light Indicates a malfunction in: • The SRS airbag system; or • The seat belt pretensioner system. ABS warning light Indicates a malfunction in: • The ABS; or •...
Page 400 5-2. Steps to take in an emergency Warning light Warning light/Details Correction procedure Driver’s seat belt reminder light (warning buzzer) Fasten the seat belt. (On the instru- Warns the driver to fasten ment cluster) his/her seat belt. Front passenger’s seat belt reminder light (warning buzzer) Fasten the seat belt.
Page 401 5-2. Steps to take in an emergency : Rear passenger’s seat belt reminders: The rear passenger’s seat belt reminder sounds to alert the rear passenger that his or her seat belt is not fastened. The buzzer sounds for 30 seconds after the vehicle has reached a speed of at least 20 km/h (12 mph).
Page 402 5-2. Steps to take in an emergency Interior Exterior Warning Correction Warning light/Details buzzer buzzer light procedure Smart entry & start system warning light Vehicles with a Multi- drive Indicates that the driver’s door has been opened or closed with the shift lever in P, the “ENGINE START STOP”...
Page 403 5-2. Steps to take in an emergency Interior Exterior Warning Correction Warning light/Details buzzer buzzer light procedure Smart entry & start system warning light Vehicles with a Multi- drive only Indicates that the driver’s door has • Shift the shift been opened or lever to P.
Page 404 If the fuel tank is empty, refuel the vehicle immediately. The malfunction indicator lamp will go off after several trips. If the malfunction indicator lamp does not go off, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional as soon as possible. ...
Page 405 After temporarily repairing the tire with the kit, have the tire repaired or replaced by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 406 5-2. Steps to take in an emergency  Emergency tire puncture repair kit components Bottle Stickers Hose Air release cap iQ_WE_74014E...
Page 407 5-2. Steps to take in an emergency Compressor Air pressure gauge Compressor switch Power plug iQ_WE_74014E...
Page 408 5-2. Steps to take in an emergency Taking out the emergency tire puncture repair kit Vehicles with rear seat Fold down the rear seat seatbacks. (P. 82) Turn the knobs and remove them. Luggage Remove the luggage box. Take out the emergency tire puncture repair kit.
Page 409 5-2. Steps to take in an emergency Vehicles without rear seat Open the deck board. Deck board Take out the emergency tire puncture repair kit. Emergency tire puncture repair kit iQ_WE_74014E...
Page 410: Emergency Repair
 In the following cases, the tire cannot be repaired with the emergency tire puncture repair kit. Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.  When the tire is damaged due to driving without sufficient air pressure ...
Page 411 5-2. Steps to take in an emergency Emergency repair method Take out the repair kit from the plastic bag. Remove the valve cap from the valve of the punctured tire. Remove the air release cap from the hose. You will use the air release cap again.
Page 412 5-2. Steps to take in an emergency Make sure that the compressor switch is off. Remove the rubber stopper from the compressor. Connect the power plug to the power outlet socket. (P. 295) iQ_WE_74014E...
Page 413 5-2. Steps to take in an emergency Connect the bottle to the com- pressor. Make sure that the bottle is securely connected. Attach the 2 stickers as shown. Remove any dirt and moisture from the wheel before attaching the label. iQ_WE_74014E...
Page 414 5-2. Steps to take in an emergency Check the specified tire inflation pressure. Tire inflation pressure is specified on the label on the driver’s side pillar as shown. (P. 455) Left-hand drive vehicles Right-hand drive vehicles Start the vehicle’s engine. To inject the sealant and inflate the tire, turn the compressor switch on.
Page 415 (40 minutes at low tem- perature) with the switch on, the tire is too damaged to be repaired. Turn the compressor switch off and contact any authorized Toyota dealer or repairer, or another duly quali- fied equipped profes- sional.
Page 416 5-2. Steps to take in an emergency With the compressor switch off, disconnect the hose from the valve on the tire and then pull out the power plug from the power outlet socket. Some sealant may leak when the hose is removed. Install the valve cap onto the valve of the emergency repaired tire.
Page 417 If the tire inflation pressure is under 130 kPa (1.3 kgf/cm bar, 19 psi): The puncture can- not be repaired. Contact any authorized Toyota dealer or repairer, or another duly quali- fied and equipped profes- sional. If the tire inflation pressure is 130 kPa (1.3 kgf/cm...
Page 418 The sealant stored in the emergency tire puncture repair kit can be used  only once to temporarily repair a single tire. If the sealant has been used and needs to be replaced, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. ...
Page 419 5-2. Steps to take in an emergency If the tire is inflated to more than the specified air pressure  Disconnect the hose from the valve. Install the air release cap to the end of the hose and push the protrusion on the air release cap into the tire valve to let some air out.
Page 420 5-2. Steps to take in an emergency CAUTION  Do not drive the vehicle with a flat tire Do not continue driving with a flat tire. Driving even a short distance with a flat tire can damage the tire and the wheel beyond repair.
Page 421 5-2. Steps to take in an emergency CAUTION  When fixing the flat tire  If the hose comes off the valve while inflating the tire, there is a risk that the hose will move abruptly due to air pressure. ...
Page 422 5-2. Steps to take in an emergency NOTICE  When performing an emergency repair  A tire should only be repaired with the emergency tire puncture repair kit if the damage is caused by a sharp object such as nail or screw passing through the tire tread.
Page 423: If The Engine Will Not Start
5-2. Steps to take in an emergency If the engine will not start If the engine still does not start after following the correct starting procedure (P. 176, 179) or releasing the steering lock (P. 177, 182), confirm the following points. ...
Page 424 Even if the engine can be started using the above steps, the system may be malfunctioning. Have the vehicle checked by any authorized Toyota dealer or repairer, or another duly qualified and equipped pro- fessional. iQ_WE_74014E...
Page 425: Shifted From P (Vehicles With A Multidrive)
(a system to prevent accidental operation of the shift lever). Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional, immediately. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted.
Page 426: If You Lose Your Keys
5-2. Steps to take in an emergency If you lose your keys New genuine keys can be made by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. For vehicles without the smart entry & start system, bring a master key and the key number stamped on the key number plate.
Page 427 (P. 119) Starting the engine Vehicles with a Multidrive Shift the shift lever to P and apply the brakes. Touch the Toyota emblem side of electronic “ENGINE START STOP” switch. Press the “ENGINE START STOP” switch within 10 seconds after the buzzer sounds, keeping the brake pedal depressed.
Page 428 Press the “ENGINE START STOP” switch within 10 seconds after the buzzer sounds, keeping the clutch pedal depressed. In the event that the “ENGINE START STOP” switch still cannot be operated, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. ...
Page 429 5-2. Steps to take in an emergency Changing “ENGINE START STOP” switch modes  Vehicles with a Multidrive Within 10 seconds of the buzzer sounding, release the brake pedal and press the “ENGINE START STOP” switch. The engine does not start and modes will be changed each time the switch is pressed.
Page 430: If The Vehicle Battery Is Discharged
The following procedures may be used to start the engine if the vehi- cle’s battery is discharged. You can call any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. If you have a set of jumper (or booster) cables and a second vehi- cle with a 12-volt battery, you can jump start your Toyota following the steps below.
Page 431 5-2. Steps to take in an emergency 1NR-FE engine Positive (+) battery terminal on your vehicle Positive (+) battery terminal on the second vehicle Negative (-) battery terminal on the second vehicle Connect the jumper cable to ground on your vehicle as shown in the illustration.
Page 432 When the vehicle battery is removed or discharged  Any data stored in the computer will be erased. When the vehicle battery is discharged, have the vehicle checked at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. ...
Page 433 5-2. Steps to take in an emergency The status of the “ENGINE START STOP” switch remains stored in the  vehicle memory. When the vehicle battery is discharged, the vehicle returns to the status before the battery was discharged after disconnect- ing and reconnecting the battery.
Page 434 5-2. Steps to take in an emergency CAUTION  Battery precautions  In the event that battery fluid comes into contact with the skin or eyes, immediately wash the affected area with water and seek medical attention. Place a wet sponge or cloth over the affected area until medical attention can be received.
Page 435: If Your Vehicle Overheats
After the engine has cooled down sufficiently, inspect the hoses and radiator core (radia- tor) for any leaks. Radiator Cooling fan If a large amount of coolant leaks, immediately contact any autho- rized Toyota dealer or repairer, or another duly qualified equipped professional. iQ_WE_74014E...
Page 436 (The fan may not operate in freezing temperatures.) If the fan is not operating: Stop the engine immediately and contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. If the fan is operating: Have the vehicle inspected at the nearest authorized Toy- ota dealer or repairer, or another duly qualified and equipped professional.
Page 437 5-2. Steps to take in an emergency CAUTION  To prevent an accident or injury when inspecting under the hood of your vehicle  If steam is seen coming from under the hood, do not open the hood until the steam has subsided. The engine compartment may be very hot, caus- ing serious injuries such as burns.
Page 438: Stuck
5-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt, or snow. Stop the engine. Set the parking brake and put the shift lever in P (Multidrive) or N (manual transmission).
Page 439 5-2. Steps to take in an emergency CAUTION  When attempting to free a stuck vehicle If you choose to rock the vehicle back and forth to free it, make sure the sur- rounding area is clear, to avoid striking other vehicles, objects or persons. The vehicle may also lunge forward or lunge back suddenly as it becomes free.
Page 440: To Be Stopped In An Emergency
5-2. Steps to take in an emergency If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the following pro- cedure: Steadily step on the brake pedal with both feet and firmly depress it.
Page 441 5-2. Steps to take in an emergency Vehicles with smart entry & start system: To stop the engine, press and hold the “ENGINE START STOP” switch for 2 consecutive sec- onds or more, or press it Press and hold for 2 seconds or more, briefly 3 times or more in suc- or press briefly 3 times or more cession.
Page 442 5-2. Steps to take in an emergency iQ_WE_74014E...
Page 443: Maintenance Data
Vehicle specifications 6-1. Specifications Maintenance data (fuel, oil level, etc.)..444 Fuel information ....457 6-2. Customization Customizable features ..459 iQ_WE_74014E...
Page 444 6-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions and weight Overall length 2985 mm (117.5 in.) Overall width 1680 mm (66.1 in.) Overall height 1500 mm (59.1 in.) Wheelbase 2000 mm (78.7 in.) Front 1480 mm (58.3 in.) Tread Rear 1460 mm (57.5 in.) 1KR-FE engine...
Page 445  Vehicle identification number The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped under the right-hand front seat.
Page 446 6-1. Specifications  Engine number The engine number is stamped on the engine block as shown. 1KR-FE engine 1NR-FE engine iQ_WE_74014E...
Page 447 6-1. Specifications Engine Model 1KR-FE and 1NR-FE 1KR-FE engine 3-cylinder in line, 4-cycle, gasoline Type 1NR-FE engine 4-cylinder in line, 4-cycle, gasoline 1KR-FE engine 71.0  84.0 mm (2.80  3.31 in.) Bore and stroke 1NR-FE engine 72.5  80.5 mm (2.85  3.17 in.) 1KR-FE engine 998 cm (60.9 cu.in.)
Page 448 6-1. Specifications 1KR-FE engine 6.5 7.5 mm (0.26 0.29 in.) 10.0 12.0 mm (0.39 0.47 in.) Vehicles without air conditioning system: 55 mm (2.17 in.) Generator Water pump Crankshaft Vehicles with air conditioning system: 55 mm (2.17 in.) Generator Drive belt tension Water pump Crankshaft Air conditioning...
Page 449: Lubrication System
6-1. Specifications Fuel EU area: Unleaded gasoline conforming to European stan- Fuel type dard EN228 only Except EU area: Unleaded gasoline only Research octane number 95 or higher Fuel tank capacity 32 L (8.5 gal., 7.0 Imp.gal.) (Reference) Lubrication system Oil capacity (Drain and refill -reference)
Page 450 6-1. Specifications  Engine oil selection “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Toyota rec- ommends the use of approved “Toyota Genuine Motor Oil”. Another motor oil of matching quality can also be used. Oil grade: 0W-20, 5W-20, 5W-30 and 10W-30: API grade SL “Energy-Conserving”, SM “Energy-Conserving”, SN...
Page 451 6-1. Specifications The 0W portion of the oil viscosity rating indicates the characteristic of the oil which allows cold startability. Oils with a lower value before the W allow for easier starting of the engine in cold weather. The 20 in 0W-20 indicates the oil viscosity when the oil is at its operating temperature.
Page 452 Vehicles with a Multidrive 4.9 L (5.2 qt., 4.3 Imp.qt.) Use either of the following. • “Toyota Super Long Life Coolant” • Similar high-quality ethylene glycol-based non- Coolant type silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid tech- nology Do not use plain water alone.
Page 453 Please be aware that depending on the particular characteristics of the gear oil used or the operating conditions, idle sound, shift feeling and/or fuel effi- ciency may be different or affected. Toyota recommends to use “TOYOTA Genuine Manual Transmission Gear Oil LV” to achieve optimal performance.
Page 454 NOTICE  Multidrive fluid type Using transmission fluid other than “TOYOTA Genuine CVT Fluid FE” may cause deterioration in shift quality, locking up of your transmission accompa- nied by vibration, and ultimately damage the transmission of your vehicle. Clutch 5 ...
Page 455 6-1. Specifications Brakes Pedal clearance Vehicles with rear drum brake 91 mm (3.58 in.) Min. Vehicles with rear disc brake 86 mm (3.39 in.) Min. 1  6 mm (0.04  0.24 in.) Pedal free play Parking brake lever travel 6 ...
Page 456 Failure to do so may cause damage to the peripheral parts of the tires, as well as dangerous handling characteristics, which may lead to fatal or injury accidents. Do not use tire sizes or wheel sizes other than those recommended by Toyota. Light bulbs Light Bulbs Type...
Page 457: Fuel Information
Research Octane Number of 95 or higher.  Fuel tank opening for unleaded gasoline To help prevent incorrect fueling, your Toyota has a fuel tank opening that only accommodates the special nozzle on unleaded fuel pumps.  If your engine knocks ...
Page 458 The use of these fuels will damage the vehicle’s fuel system. In case of any doubt, ask any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 459 Your vehicle includes a variety of electronic features that can be per- sonalized to your preferences. Programming these preferences requires specialized equipment and may be performed by any autho- rized Toyota dealer or repairer, or another duly qualified and equipped professional. Some function settings are changed simultaneously with other functions being customized.
Page 460 6-2. Customization Customized Item Function Default setting setting 7.5 seconds Time elapsed before 15 seconds lights turn off 30 seconds Operation when the doors are unlocked Operation after the “ENGINE START Illumination STOP” switch turned  P. 286) OFF (vehicles with smart entry &...
Page 461 Index Abbreviation list ...... 462 Alphabetical index....463 What to do if......471 iQ_WE_74014E...
Page 462: Abbreviation List
Abbreviation list Abbreviation/Acronym list ABBREVIATIONS MEANING Anti-Lock Brake System Accessory Child Restraint System Emergency Locking Retractor Electric Power Steering Light Emitting Diode Supplemental Restraint System Traction Control Treadwear Indicators Vehicle Identification Number Vehicle Stability Control iQ_WE_74014E...
Page 463: Alphabetical Index
Alphabetical index Alphabetical index A/C........238, 244 Audio system ABS ........... 224 Antenna ........ 264 Air conditioning filter ....354 Audio input......282 Air conditioning system AUX port ....... 282 Air conditioning filter....354 CD player......265 Automatic air conditioning MP3/WMA disc .....
Page 464 Alphabetical index Care Cooling system Exterior........306 Engine overheating....435 Interior........310 CRS ........... 137 Seat belts ......311 Cup holders......289 CD player ........265 Curtain shield airbags..... 124 Chains........233 Customizable features .... 459 Child restraint system Baby seats, definition.... 137 Daytime running light Baby seats, installation ..
Page 465 Alphabetical index Eco driving indicator Engine coolant light......167, 201, 209 Capacity........ 452 Electric power steering ... 224 Checking....... 340 Emergency flashers Preparing and checking Switch ........386 before winter....... 231 Emergency, in case of Engine immobilizer system ..108 If the electronic key does not Engine oil operate properly ....
Page 466 Alphabetical index Front turn signal lights Identification Lever ........193 Engine........446 Replacing light bulbs..... 373 Vehicle ........445 Wattage......... 456 Ignition switch ....176, 179 Fuel Illuminated entry system ..286 Capacity ........ 449 Indicator lights......199 Fuel gauge ......205 Inside rear view mirror ....
Page 467 Alphabetical index License plate lights Multidrive Replacing light bulbs..... 373 7-Speed Sport Sequential Switch ........211 Shiftmatic mode....187 Wattage......... 456 If the shift lever cannot be Light bulbs shifted from P ..... 425 Replacing ......373 Multidrive ......185 Wattage.........
Page 468 Alphabetical index Rear turn signal lights Shift lever Lever ........193 If the shift lever cannot Replacing light bulbs..... 374 be shifted from P ....425 Wattage......... 456 Manual transmission..... 189 Rear view mirror Multidrive ......185 Anti-glare......... 92 Shift lock system ..... 425 Rear window Side airbags ......
Page 469 Alphabetical index Switch Traction control ....... 224 Airbag manual on-off TRC ........... 224 switch........159 Trip information ....... 205 Emergency flasher switch ..386 Trip meter ......... 206 Engine switch....176, 179 Turn signal lights Fog light switch ..... 216 Lever........
Page 470 Alphabetical index Washer Checking ....... 346 Preparing and checking before winter.......231 Switch ......218, 222 Washing and waxing ....306 Weight........444 Wheels ........352 Window glasses ...... 100 Window lock switch....100 Windows Power windows ..... 100 Rear window defogger .....
Page 471: Side Doors P
What to do if... What to do if... A tire punctures If you have a flat tire P. 405 P. 423 If the engine will not start P. 108 Engine immobilizer system The engine does not start If the vehicle battery is discharged P.
Page 472: Instrument Cluster
What to do if... The vehicle is stuck in If the vehicle becomes stuck P. 438 mud or sand The warning light or indicator If a warning light turns on P. 397 light comes on  Instrument cluster  Center panel Left-hand drive vehicles with audio system iQ_WE_74014E...
Page 473 What to do if... Right-hand drive vehicles with audio system Vehicles without audio system iQ_WE_74014E...
Page 474: Warning Lights
What to do if... Warning lights Low fuel level warning Brake system warning light light P. 397 P. 399 Charging system warning Driver’s seat belt light P. 398 reminder light P. 400 Front passenger’s seat belt Low engine oil pressure reminder light warning light P.
Page 475 Memo iQ_WE_74014E...
Page 476: Gas Station Information
GAS STATION INFORMATION Hood lock release lever Auxiliary catch lever Fuel filler door P. 319 P. 319 P. 103 Tire inflation pressure Fuel filler door opener P. 455 P. 103 Fuel tank capacity 32 L (8.5 gal., 7.0 Imp.gal.) (Reference) Fuel type P.

Toyota IQ 2012 Owner's Manual

1 Before Driving

Key Information

Adjustable Components

Refueling

Theft Deterrent System

Safety Information

2 When Driving

Instrument Cluster

Quick Links

TABLE OF CONTENTS

Related Manuals for Toyota IQ 2012

Summary of Contents for Toyota IQ 2012

Table of Contents