Removing A Child Restraint System Installed With A Seat Belt; When Installing A Child Restraint System - Toyota Rush Owner's Manual

◆

Removing a child restraint system installed with a seat belt

Press the buckle release button and fully retract the seat belt.
When releasing the buckle, the child restraint system may spring up due
to the rebound of the seat cushion. Release the buckle while holding
down the child restraint system.
Since the seat belt automatically reels itself, slowly return it to the stow-
ing position.

When installing a child restraint system

■
You may need a locking clip to install the child restraint system. Follow the
instructions provided by the manufacturer of the system. If your child restraint
system does not provide a locking clip, you can purchase the following item
from your Toyota dealer: Locking clip for child restraint system
(Part No. 73119-22010)
WARNING
When installing a child restraint system
■
Observe the following precautions.
Failure to do so may result in death or serious injury.
Do not allow children to play with the seat belt. If the seat belt becomes
●
twisted around a child's neck, it may lead to choking or other serious inju-
ries that could result in death. If this occurs and the buckle cannot be
unfastened, scissors should be used to cut the belt.
Ensure that the belt and plate are securely locked and the seat belt is not
●
twisted.
Shake the child restraint system left and right, and forward and backward
●
to ensure that it has been securely installed.
After securing a child restraint system, never adjust the seat.
●
When a junior seat (booster seat) is installed, always ensure that the
●
shoulder belt is positioned across the center of the child's shoulder. The
belt should be kept away from the child's neck, but not so that it could fall
off the child's shoulder.
Follow all installation instructions provided by the child restraint system
●
manufacturer.
RUSH_OM_General_OMBZ265
1-2. Child safety
63
1