Toyota INNOVA Owner's Manual page 76

ISOFIX child restraint systems are divided into different "fixture".
The child restraint system can be used in the seating positions for
"fixture" mentioned in the table above. For kind of "fixture" relation,
confirm the following table.
If your child restraint system has no kind of "fixture" (or if you can-
not find information in the table below), please refer to the child
restraint system "vehicle list" for compatibility information or ask the
retailer of your child seat.
Fixture
F3
F2
F2X
R3
R2
R2X
R1
L1
L2
B2
B3
Vehicles with bench type second seat: When securing some types
of child restraint systems in rear seat, it may not be possible to
properly use the seat belts in positions next to the child restraint
without interfering with it or affecting seat belt effectiveness. Be
sure your seat belt fits snugly across your shoulder and low on your
hips. If it does not, or if it interferes with the child restraint, move to
a different position.
Failure to do so may result in death or serious injury.
INNOVA_OM_OM71301E_(GE)
Full-height, forward-facing child restraint systems
Reduced-height forward-facing child restraint systems
Reduced-height forward-facing child restraint systems
Full-size, rearward-facing child restraint systems
Reduced-size, rearward-facing child restraint systems
Reduced-size, rearward-facing child restraint systems
Rearward-facing infant seat
Left lateral-facing (carrycot) infant seat
Right lateral-facing (carrycot) infant seat
Junior seat
Junior seat
1-2. Child safety
Description
75
1