Displaying The Device Status; Setting The Automatic Connection Confirmation Display To On Or Off - Toyota INNOVA Owner's Manual

Displaying the device status

Select "Bluetooth* info" using the "TUNE >" or "< SELECT" button,
and press the "SETUP ENTER" button.
● Displaying the device name
Select "Device name" using the "TUNE >" or "< SELECT" button,
and press the "SETUP ENTER" button.
● Displaying the device address
Select "Device address" using the "TUNE >" or "< SELECT" button,
and press the "SETUP ENTER" button.
*
: The Bluetooth
Bluetooth SIG, Inc.

Setting the automatic connection confirmation display to on or off

If the "Display setting" is set to on, the portable player connection sta-
tus will be displayed when the engine switch is turned to the "ACC"
position (vehicles without smart entry & start system) or ACCESSORY
mode (vehicles with smart entry & start system).
Select "Display setting" using the "TUNE >" or "< SELECT" button,
1
and press the "SETUP ENTER" button.
Select "ON" or "OFF" using the "SETUP ENTER" button.
2
INNOVA_OM_OM71301E_(GE)
®
word mark and logos are registered trademarks owned by
5-7. "SETUP" menu
339
5