Turn Signals Can Be Operated When; If The Indicator Flashes Faster Than Usual; If Turn Signals Stop Flashing Before Lane Change Has Been Performed; To Discontinue Flashing Of Turn Signals During A Lane Change - Toyota INNOVA Owner's Manual

■

Turn signals can be operated when


Vehicles without smart entry & start system
The engine switch is in the "ON" position.

Vehicles with smart entry & start system
The engine switch is in IGNITION ON mode.
■

If the indicator flashes faster than usual

Check that a light bulb in the front or rear turn signal lights has not burned
out.
■ If the turn signals stop flashing before a lane change has been per-
formed
Operate the lever again.
To discontinue flashing of the turn signals during a lane change
■
Operate the lever in the opposite direction.
■ Customization
The number of times the turn signals flash during a lane change can be
changed. (Customizable features: P. 726)
INNOVA_OM_OM71301E_(GE)
4-2. Driving procedures
229
4