Repairing Or Replacing Tires, Wheels, Tire Pressure Warning Valves; To Avoid Damage To The Tire Pressure Warning Valves And Transmitters; Driving On Rough Roads; If Tire Inflation Pressure Of Each Tire Becomes Low While Driving - Toyota INNOVA Owner's Manual

608
7-3. Do-it-yourself maintenance
NOTICE

Repairing or replacing tires, wheels, tire pressure warning valves,

■
transmitters and tire valve caps (vehicles with tire pressure warning
system)
● When removing or fitting the wheels, tires or the tire pressure warning
valves and transmitters, contact your Toyota dealer as the tire pressure
warning valves and transmitters may be damaged if not handled correctly.
Make sure to install the tire valve caps. If the tire valve caps are not
●
installed, water could enter the tire pressure warning valves and the tire
pressure warning valves could be bound.
● When replacing tire valve caps, do not use tire valve caps other than those
specified. The cap may become stuck.

To avoid damage to the tire pressure warning valves and transmitters

■
(vehicles with tire pressure warning system)
When a tire is repaired with liquid sealants, the tire pressure warning valve
and transmitter may not operate properly. If a liquid sealant is used, contact
your Toyota dealer or other qualified service shop as soon as possible. After
use of liquid sealant, make sure to replace the tire pressure warning valve
and transmitter when repairing or replacing the tire. (P. 602)
■

Driving on rough roads

Take particular care when driving on roads with loose surfaces or potholes.
These conditions may cause losses in tire inflation pressure, reducing the
cushioning ability of the tires. In addition, driving on rough roads may cause
damage to the tires themselves, as well as the vehicle's wheels and body.
■

If tire inflation pressure of each tire becomes low while driving

Do not continue driving, or your tires and/or wheels may be ruined.
INNOVA_OM_OM71301E_(GE)