Removing A Child Restraint Installed With A Seat Belt; Installation With Isofix Rigid Anchor - Toyota Prius+ Owner's Manual

Removing a child restraint installed with a seat belt

Installation with ISOFIX rigid anchor (ISOFIX child restraint sys-
tem) (second outside seats only)
STEP 1
PRIUS +_OM_OM47821E_(EE)
1-8. Safety information
Press the buckle release button
and fully retract the seat belt.
Adjusting the angle of the seat-
back.
While pulling the lever (either
or ), fold the seatback forward
and then back to the 1st lock
position (most upright position)
until it locks into place. Adjust the
seatback to the 5th lock position.
1st lock position
A
5th lock position
B
Move the seat as far back as
possible.
1
191